I have attached the PDF file which included the soft code.
On Tue, Jan 27, 2009 at 11:00 AM,
<address@hidden> wrote:
Send Discuss-gnuradio mailing list submissions to
address@hidden
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
or, via email, send a message with subject or body 'help' to
address@hidden
You can reach the person managing the list at
address@hidden
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Discuss-gnuradio digest..."
Today's Topics:
1. Re: Listen to Mp3 via FM broadcast (Dimitris Symeonidis)
----------------------------------------------------------------------
Message: 1
Date: Tue, 27 Jan 2009 17:21:31 +0100
From: Dimitris Symeonidis <address@hidden>
Subject: Re: [Discuss-gnuradio] Listen to Mp3 via FM broadcast
To: jingx kwan <address@hidden>
Cc: address@hidden
Message-ID:
<address@hidden>
Content-Type: text/plain; charset=UTF-8
could you post a link to this code?
I could take a look at it for you...
Dimitris Symeonidis
"If you think you're too small to make a difference, try sleeping with
a mosquito!" - Amnesty International
On Sun, Jan 25, 2009 at 21:00, jingx kwan <address@hidden> wrote:
> Hello,
>
> I just have the GNU Radio equipment setups and runs together with the Ubutun
> 8.10 with my Latitude D610 notebook.
> I have successfully test and the GNU software is running properly. Still, I
> have problem to run a code posted on-line by Elie Salameh. I typed and
> copied the code exactly as what it is, but I still fail.
>
> The error message said:
> address@hidden:~/gnuradio/gnuradio-examples/python/usrp$ ./gnu_fm2.py -l
> 2.plsNumber of items in list 3
>
> /home/usrp/gnuradio/gnuradio-examples/python/usrp/se-exp-steve-fossett-21jan09_0.Mp3
> /home/usrp/gnuradio/gnuradio-examples/python/usrp/se-tia-presidential-inaugurations-19jan09-CQ_0.Mp3
> /home/usrp/gnuradio/gnuradio-examples/python/usrp/jan-24-09-AS-Paul-Bunyan_0.Mp3
> Using TX d'board A: Flex 2400 Tx MIMO B
> Traceback (most recent call last):
> File "./gnu_fm2.py", line 132, in <module>
> wfm_tx()
> File "./gnu_fm2.py", line 85, in __init__
> if not self.set_freq(options.freq):
> File "./gnu_fm2.py", line 123, in set_freq
> r = self.u.tune(self.subdev.which, self.subdev, target_freq)
> File "/usr/local/lib/python2.5/site-packages/gnuradio/usrp/usrp_swig.py",
> line 2688, in __tune
> r = self._real_tune(chan, db, target_freq, tr)
> File "/usr/local/lib/python2.5/site-packages/gnuradio/usrp/usrp_swig.py",
> line 2089, in _real_tune
> return _usrp_swig.usrp_sink_c_sptr__real_tune(*args, **kwargs)
> TypeError: in method 'usrp_sink_c_sptr__real_tune', argument 2 of type 'int'
> ========================================
> the code
>
> #!/usr/bin/python
>
> from gnuradio import gr, eng_notation
> from gnuradio import usrp
> from gnuradio import audio
> from gnuradio import blks2
> from gnuradio.eng_option import eng_option
> from optparse import OptionParser
> from usrpm import usrp_dbid
> import math, re, sys, thread, time, tempfile, os, random
> from gnuradio.wxgui import stdgui2, fftsink2
> import wx
>
>
> # this function sends a command to Linux that will
> # use sox to transform mp3 to raw
> def mp3toraw(filename,outputfile):
> print("nice -n 19 sox \"%s\" -r 32000 -t raw -f -l -c 1 %s\n" %
> (filename,outputfile))
> os.system("nice -n 19 sox \"%s\" -r 32000 -t raw -f -l -c 1 %s" %
> (filename,outputfile))
> # this function will read the location of the mp3 files out of the
> #.pls file
> def read_playlist(fname):
> input = open(fname, 'r')
> playlist=[]
> l = input.readline()
> # NumberOfEntries
> l = input.readline()
> nentries = int(re.findall("NumberOfEntries=([0-9]+)",l)[0])
> print "Number of items in list %d\n" % nentries
> i = 1
> while l:
> l=input.readline()
> filepath = re.findall("File[0-9]+=(.*)$",l)
> if filepath:
> print filepath[0]
> playlist.append(filepath[0])
> i = i + 1
> input.close()
> return(playlist)
> #this function will create a temprary .raw file that will used by the sox
> command
> def mktempfn():
> tf = tempfile.mkstemp(".raw")
> outputfile = tf[1]
> os.close(tf[0])
> os.remove(tf[1])
> return(outputfile)
> # this code is used for mudulation
> # it takes options from the command line
> # most of this code is take from fm_tx4.py
> class wfm_tx:
> def __init__(self):
> parser = OptionParser (option_class=eng_option)
> parser.add_option("-T", "--tx-subdev-spec",
> type="subdev",default=None,help="select USRP Tx side A or B")
> parser.add_option("-f", "--freq", type="eng_float",default=90.1e6,
> help="set Tx frequency to FREQ (default 90.1e6)", metavar="FREQ")
> parser.add_option("-l","--playlist", action="">
> default="1.pls", help="MP3 playlist containing files to air.")
> parser.add_option("","--debug", action="">> default=False,help="Launch Tx debugger")
> (options, args) = parser.parse_args ()
> if len(args) != 0:
> parser.print_help()
> sys.exit(1)
> if options.playlist == None:
> print "No playlist specified\n"
> sys.exit()
> # parse playlist
> playlist = read_playlist(options.playlist)
> # setup IQ rate to 320kS/s and audio rate to 32kS/s
> self.u = usrp.sink_c()
> self.dac_rate = self.u.dac_rate() # 128 MS/s
> self.usrp_interp = 400
> self.u.set_interp_rate(self.usrp_interp)
> self.usrp_rate = self.dac_rate / self.usrp_interp # 320 kS/s
> self.sw_interp = 10
> self.audio_rate = self.usrp_rate / self.sw_interp # 32 kS/s
> # determine the daughterboard subdevice we're using
> if options.tx_subdev_spec is None:
> options.tx_subdev_spec = usrp.pick_tx_subdevice(self.u)
> m = usrp.determine_tx_mux_value(self.u, options.tx_subdev_spec)
> self.u.set_mux(m)
> self.subdev = usrp.selected_subdev(self.u,options.tx_subdev_spec)
> print "Using TX d'board %s" % (self.subdev.side_and_name(),)
> self.subdev.set_gain(self.subdev.gain_range()[1]) # set max Tx
> gain
>
> if not self.set_freq(options.freq):
> freq_range = self.subdev.freq_range()
> print "Failed to set frequency to %s. Daughterboard supports %s
> to %s" % (
> eng_notation.num_to_str(options.freq),
> eng_notation.num_to_str(freq_range[0]),
> eng_notation.num_to_str(freq_range[1]))
> raise SystemExit
>
> self.subdev.set_enable(True) # enable
> transmitter
> print "TX freq %1.2f MHz\n" % (options.freq/1e6)
> gain = gr.multiply_const_cc(4000.0)
> i = 0
> while 1:
> self.fg = gr.flow_graph()
> outputfile = mktempfn()
> # write raw sound to named pipe in background
> thread.start_new_thread(mp3toraw,(playlist[i],outputfile))
> # wait untill the conversion of mp3 to raw is completed
> time.sleep(3)
> print "File size %d\n" % int(os.stat(outputfile)[6])
> #specify the source file
> src = "" outputfile, False)
> #configure the modulation block
> fmtx = blks.wfm_tx(self.fg, self.audio_rate,
> self.usrp_rate,max_dev=75e3, tau=75e-6)
> # connect blocks
> self.fg.connect(src, fmtx, gain, self.u)
> print "starting to transmit\n"
> self.fg.run()
> print "done..."
> # remove the temprary file
> os.remove(outputfile)
> # stop the sox command if it is still working
> os.system("killall sox")
> def set_freq(self, target_freq):
> """
> Set the center frequency we're interested in.
> """
> r = self.u.tune(self.subdev.which, self.subdev, target_freq)
> if r:
> print "r.baseband_freq
> =",eng_notation.num_to_str(r.baseband_freq)
> print "r.dxc_freq =",eng_notation.num_to_str(r.dxc_freq)
> print "r.residual_freq
> =",eng_notation.num_to_str(r.residual_freq)
> print "r.inverted =", r.inverted
> return True
> return False
> if __name__ == '__main__':
> wfm_tx()
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
>
------------------------------
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
End of Discuss-gnuradio Digest, Vol 74, Issue 72
************************************************
elie_doc.pdf