Re: [Discuss-gnuradio] ISE11.1 error using Linux CLI..Update HELP

[Jeff Brower]

Matt-

> We are currently working on a fix for the problems with compiling
> under the ISE 11.  We believe it to be a problem with ISE 11,
> since the design works fine under ISE 10, but have not gotten
> very far.  Any help anyone can provide on this would be much
> appreciated.

I didn't see ISE 10 vs. 11 threads currently active on comp.arch.fpga, but if 
you guys start one please mention so we
can follow along and possibly contribute in some way.  We're not using ISE 11 
yet, but we do a lot of ISE and Xilinx
FPGA work.

Thanks.

-Jeff

> On 01/18/2010 05:38 AM, Mahesh Poolakkaparambil wrote:
>> Hello ,
>>
>>                I have posted a query on the forum regarding "compiling
>> address@hidden on ISE11.1 ", I still could not find a good remedy for this. 
>> I am attaching the error message with this
mail. i hope this will help form some one to help me regarding the problem.
>>
>>
>> Compiling verilog file "../../u2_core/u2_core.v" in library work Module 
>> <atr_controller> compiled
>> Compiling verilog file "../u2_rev3.v" in library work
>> Module <u2_core> compiled
>> Module <u2_rev3> compiled
>> No errors in compilation
>> Analysis of file <"u2_rev3.prj"> succeeded.
>>
>>
>> ========================================================================= *  
>>                    Design Hierarchy
Analysis                         * 
=========================================================================
ERROR:HDLCompilers:87 - "../../../eth/rtl/verilog/MAC_rx/MAC_rx_FF.v" line 134 
Could not find module/primitive
'fifo_xlnx_2Kx36_2clk' ERROR:HDLCompilers:87 - "../../../eth/mac_txfifo_int.v" 
line 35 Could not find
module/primitive 'fifo_xlnx_512x36_2clk'
>> -->
>>
>>
>> Total memory usage is 131520 kilobytes
>>
>> Number of errors   :    2 (   0 filtered)
>> Number of warnings :    0 (   0 filtered)
>> Number of infos    :    0 (   0 filtered)
>>
>>
>> Process "Synthesis" failed
>> INFO:TclTasksC:1850 - process run : Generate Programming File is done
>>
>>
>> I hope to hear a remedy for this problem,
>>
>> Once again thanks in advance,
>> Mahesh