[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] Spectrum at 1 GHz
From: |
Umair Naeem |
Subject: |
[Discuss-gnuradio] Spectrum at 1 GHz |
Date: |
Mon, 12 Apr 2010 07:29:03 +0000 |
I have a query regarding flow graph in GRC.
I am trying to get spectrum from DBS_RX daughter board using GRC. I have used
three blocks as
USRP2 Source --> FFT Filter --> FFT Sink
They have following parameters,
USRP2 Source:
Decimation 1M
Frequency 1G
Gain (dB) 0
FFT Filter:
Decimation 1
Taps firdes.complex_band_pass(1.0, 3000, -0.05e3, 0.05e3, 5,
firdes.WIN_HAMMING, 0)
FFT Sink:
Sample Rate 2K
Baseband Frequency 1K
FFT Size 512
Refresh Rate 30
I need to display shows frequency spectrum centered at 1 GHz. Since I am using
decimation of 1M, the frequency is lowered down to 1K. I filter it using FFT
bandpass filter with 100 Hz bandwidth. The fft sink shows spectrum at around 1
KHz. The problem is if I do not use decimation, the GRC seems to be very slow
(may be processing 1 GHz at GHz sample rate is too much). I need to make a FFT
plot showing spectrum at 1 GHz. How Can I accomplish this?
Regards,
Umair Naeem
MSc Communication Engineering
Chalmers University ot Technology, Sweden.
- [Discuss-gnuradio] Spectrum at 1 GHz,
Umair Naeem <=