[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Discuss-gnuradio] Re: problem with tvrx , wbx and AO-51.

From: Patirck Strasser
Subject: [Discuss-gnuradio] Re: problem with tvrx , wbx and AO-51.
Date: Tue, 08 Jun 2010 11:50:10 +0200
User-agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; de; rv: Gecko/20100317 Lightning/1.0b1 Thunderbird/3.0.4

schrieb naveen nischal am 2010-06-04 23:49:

I have recently got into doing the SDR, i have been using the both the
tvrx and wbx daughter boards for communicating with the ham radio at
435.300Mhz. I am not too good at python so i use GRC. However when i try
to receive from the voice from the AO-51 satellite at the same 435.3Mhz
frequency i dont get anything. Any comments or suggestions are appreciated.

Please take a look at

AO51 seems to work as a repeater/transverter, it never resends the input at the same frequency/band. Very common is to have the uplink on 2m=145MHz and the downlink on 70cm=435MHz. This is called V/U-mode. You can find details and the current status at the link above.

Please also take Doppler shift into account, this is not big show-stopper at FM, but be prepared to retune sometimes. You will see the Doppler shift if you use a waterfall display.

The easiest to start is to listen first. It's very probable that you will hear some conversation during a pass.

Engineers motto: cheap, good, fast: choose any two
QTH: JN77rb
Patrick Strasser OE6PSE <oe6pse at wirklich priv at>

reply via email to

[Prev in Thread] Current Thread [Next in Thread]