Re: [Discuss-gnuradio] Can USRP2 connect to Beagle Board-Xm?

[Josh Blum]

On 10/13/2010 09:31 AM, Almohanad Fayez wrote:
> Unfortunately that doesn't work, I tried doing that with a TI board,
> DM6446, it had 100M Ether and I used a GigE switch so I ended up
> using a regular USRP.  You can detect the USRP2 using the provided
> script but you won't be able to receive radio samples.  If memory
> serves correctly, there are some GigE specific throtteling packets
> that the USRP2 sends out that 100M Ethernet can't understand.

The pause frames are for tx throttling, so that means receive should be 
fine.

Anyways, there is good news! Host based flow control is on its way (and 
will do away with those pause frames). -Josh

> al
>
>
>
>
>
>
> -----Original Message----- From: Josh Blum<address@hidden> To:
> address@hidden Sent: Wed, Oct 13, 2010 12:06 pm Subject:
> Re: [Discuss-gnuradio] Can USRP2 connect to Beagle Board-Xm?
>
>
> I head that you can use a gigE switch between usrp2 and 100M
> Ethernet. Then it may work. -Josh
>
> On 10/13/2010 07:35 AM, Zhen wrote:
> > Hello,
> >
> > I want to know if GNU Radio USRP2 can connect to Beagle Board- Xm
> >
> > I know Beagle-board can connect to USRP by USB connection. Now
> > BeagleBoard-XM has 100M Ethernet, and USPP2 uses 1000M Ethernet,
> > can they work together?
> >
> > Thanks
> >
> > Zhen
> >
> >
> >
> >
> >
> >
> >
> > _______________________________________________ Discuss-gnuradio
> > mailing list address@hidden
> > http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
> _______________________________________________ Discuss-gnuradio
> mailing list address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
>
>
>
>
> _______________________________________________ Discuss-gnuradio
> mailing list address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio