[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] can not connect USRP2 with UHD drivers

From: Marcus D. Leech
Subject: Re: [Discuss-gnuradio] can not connect USRP2 with UHD drivers
Date: Mon, 11 Apr 2011 23:40:46 -0400
User-agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv: Gecko/20101027 Fedora/3.0.10-1.fc12 Thunderbird/3.0.10

On 04/11/2011 08:34 PM, Abhijeet Mate wrote:
Hi Ron,

Thank you very much for your help. when i try to do ethtool eth0
Supported ports: [ TP MII ]
Supported link modes:   10baseT/Half 10baseT/Full 
                       100baseT/Half 100baseT/Full 
Supports auto-negotiation: Yes
Advertised link modes:  10baseT/Half 10baseT/Full 
                       100baseT/Half 100baseT/Full 
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Link partner advertised link modes:  10baseT/Half 10baseT/Full 
                                    100baseT/Half 100baseT/Full 
Link partner advertised pause frame use: No
Link partner advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: MII
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbg
Wake-on: g
Current message level: 0x00000033 (51)
Link detected: yes
this is the output i get i have
 Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
Ethernet driver.
how can i change it to gigabit. i tried it with
 sudo ethtool -s eth0 speed 1000 duplex full autoneg on
but it is not working.


The RTL8101E chipset doesn't support Gigabit Ethernet.  No amount of asking it nicely using
  ethtool can change that.

Principal Investigator
Shirleys Bay Radio Astronomy Consortium

reply via email to

[Prev in Thread] Current Thread [Next in Thread]