[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] N200 strong spikes

From: Jason Tran
Subject: Re: [Discuss-gnuradio] N200 strong spikes
Date: Thu, 3 May 2012 08:33:21 -0700 (PDT)

Hi Luca,

I've been running into a similar problem with random spikes. Are you just running uhd_fft.py? Have you tried using benchmark_rx.py/benchmark_tx.py?


From: Luca Pascale <address@hidden>
To: address@hidden
Sent: Thursday, May 3, 2012 8:18 AM
Subject: [Discuss-gnuradio] N200 strong spikes

Hi all,

I am using a N200+WBX with samplerate = 5e6, no input signal.

Independently on the tuning frequency I have two strong spikes about 1
MHz far (see attached picture on 500 MHz tuning frequency).


I have a similar situation on 434 MHz band and also changing sample
rate to 10e6;

Is it a known problem or something is wrong in my setup ?


Discuss-gnuradio mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]