[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] N200 strong spikes

From: Luca Pascale
Subject: Re: [Discuss-gnuradio] N200 strong spikes
Date: Thu, 3 May 2012 17:41:23 +0200

Hi Jason,

No, I am just using UHD driver.
The processing to perform FFT and so on has been developed by myself.
But I am quite sure that the processing is ok because with other
receivers works fine and
it provides correct results according to the test signals.

Moreover now seams that the span between the 2 spikes it's not
constant (I made some test with 2 MHz span instead of 1 MHz).
I suspect that should be some spurious due to the local oscillator
onboard WBX ??


2012/5/3 Jason Tran <address@hidden>:
> Hi Luca,
> I've been running into a similar problem with random spikes. Are you just
> running uhd_fft.py? Have you tried using benchmark_rx.py/benchmark_tx.py?
> -Jason
> ________________________________
> From: Luca Pascale <address@hidden>
> To: address@hidden
> Sent: Thursday, May 3, 2012 8:18 AM
> Subject: [Discuss-gnuradio] N200 strong spikes
> Hi all,
> I am using a N200+WBX with samplerate = 5e6, no input signal.
> Independently on the tuning frequency I have two strong spikes about 1
> MHz far (see attached picture on 500 MHz tuning frequency).
> http://img189.imageshack.us/img189/7707/spikesf.jpg
> I have a similar situation on 434 MHz band and also changing sample
> rate to 10e6;
> Is it a known problem or something is wrong in my setup ?
> Luca
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

Ing. Luca Pascale
LOG.IN S.r.l
Via Aurelia, 714
00165 ROMA - ITALY
Phone: +39-06-66417044
Fax:   +39-06-66411155
Web: www.log-in.it

reply via email to

[Prev in Thread] Current Thread [Next in Thread]