[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Why packet decode failure happen when fft-length
Ralph A. Schmid, dk5ras
Re: [Discuss-gnuradio] Why packet decode failure happen when fft-length is set to 64?
Thu, 28 Mar 2013 08:03:23 +0100
An exact clock source may help, or clocking both USRPs from the same clock.
> Could be related to the subcarrier spacing in the bandwidth and frequency
> offset. Try to hand-tune your tx and rx frequencies so they are as close
> you can get (using uhd_siggen and uhd_fft) them and see if that helps.
> Discuss-gnuradio mailing list