[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] HELP: USRP1+WBXv3 "Overflow"

From: Tom Rondeau
Subject: Re: [Discuss-gnuradio] HELP: USRP1+WBXv3 "Overflow"
Date: Tue, 30 Dec 2014 12:17:33 -0500

On Sun, Dec 28, 2014 at 10:13 PM, Thesis 2015 <address@hidden> wrote:
Good day.
Would it be fine if we placed a while or for loop statement under the variables section so that it would increment by 200kHz and would change to different frequencies within the FM spectrum.
If you have any other ideas that could help us, it would be greatly appreciated.


As Marcus said, feel free to play with these things to figure it out. But one hint you'll probably need is that any changes to the flowgraph need to happen after the top_block has already started. So look for the tb.run() or tb.start(). If using tb.run() this is a blocking call that you'll need to change:

<your for-loop here>

Something like that.


reply via email to

[Prev in Thread] Current Thread [Next in Thread]