[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Issue in file sink block
From: |
Marcus Müller |
Subject: |
Re: Issue in file sink block |
Date: |
Mon, 2 Nov 2020 16:17:14 +0100 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101 Thunderbird/78.3.1 |
File Sink is fine.
DISCLAIMER: Any attached Code is provided As Is. It has not been tested or
validated as a product, for use in a deployed application or system, or for use
in hazardous environments. You assume all risks for use of the Code. Use of the
Code is subject to terms of the licenses to the UHD or RFNoC code with which
the Code is used. Standard licenses to UHD and RFNoC can be found at
https://www.ettus.com/sdr-software/licenses/.
NI will only perform services based on its understanding and condition that the
goods or services (i) are not for the use in the production or development of
any item produced, purchased, or ordered by any entity with a footnote 1
designation in the license requirement column of Supplement No. 4 to Part 744,
U.S. Export Administration Regulations and (ii) such a company is not a party
to the transaction. If our understanding is incorrect, please notify us
immediately because a specific authorization may be required from the U.S.
Commerce Department before the transaction may proceed further.
On 02.11.20 04:39, Maitry Raval wrote:
> Hello,
>
> I understand, I think, I need to use PSK demod using below link.
> https://wiki.gnuradio.org/index.php/Guided_Tutorial_PSK_Demodulation
>
> But, as I have a requirement of storing the demod data in file , how is it
> possible using file sink or any other way, please guide.
>
> With Best Regards,
> Maitry Raval,
> R& D engineer|Azista Industries Pvt Ltd| 079-40605800|www.azistaaerospace.com
>
> ----- Original Message -----
> From: "Marcus Müller, CEL" <mueller@kit.edu>
> To: "discuss-gnuradio" <discuss-gnuradio@gnu.org>
> Sent: Saturday, October 31, 2020 9:06:22 PM
> Subject: Re: Issue in file sink block
>
> Hi Maitry,
>
> I doubt it's the file sink. That tutorial used DPSK Mod, and that's
> among the buggy packet_encoder tooling that we deprecated a long time
> ago, and finally banished two-ish years ago. It just dropped data.
>
> See the more modern packet examples that come with your GNU Radio 3.8.
>
> Cheers,
> Marcus
>
> On 31.10.20 09:34, Maitry Raval wrote:
>> Hello ,
>>
>> I am using GNU radio along with ADRV9361-Z7035 Board for data reception
>> and demodulation. I have faced an issue of using file sink block along
>> with QPSK demod blocks. when I am attaching dpsk/PSK demod block with
>> file sink, I have not received data in binary format. it gives some
>> trunk values. when I am doing wrong, please guide us.
>> I have taken a reference of below link.
>> https://courses.washington.edu/ee420/projects/lab2_gnuradio.pdf
>>
>> The only difference is that I am using receiving section only. as I am
>> transmitting from other source. so I have attached fmcommsource block
>> with dpsk demod followed by file sink.
>>
>> Please guide
>>
>> With Best Regards,
>> Maitry Raval,
>> R& D engineer|Azista Industries Pvt Ltd|
>> 079-40605800|www.azistaaerospace.com
- Re: Issue in file sink block, Maitry Raval, 2020/11/01
- Re: Issue in file sink block,
Marcus Müller <=
- Re: Issue in file sink block, Marcus Müller, 2020/11/02
- Re: Issue in file sink block, Maitry Raval, 2020/11/03
- Re: Issue in file sink block, Derek Kozel, 2020/11/03
- Re: Issue in file sink block, Aditya Arun Kumar, 2020/11/03
- Re: Issue in file sink block, Maitry Raval, 2020/11/03
- Re: Issue in file sink block, Maitry Raval, 2020/11/04
- Re: Issue in file sink block, Aditya Arun Kumar, 2020/11/04
- Re: Issue in file sink block, Maitry Raval, 2020/11/08
- Re: Issue in file sink block, Cinaed Simson, 2020/11/09
- Re: Issue in file sink block, Maitry Raval, 2020/11/09