|
From: | Ceresa Jean-Jacques |
Subject: | Re: [fluid-dev] fluid-dev Digest, Vol 213, Issue 7 |
Date: | Mon, 26 Apr 2021 20:06:21 +0200 (CEST) |
>The router config i used is this:
With this config:
1) only note on/off and pitch bend MIDI messages will be forwarded to the output router. All others MIDI messages (CC, prog change,..) will be ignored.
2) Any MIDI messages (note on/off, pitch bend) with channels in the range [0-15] will be changed in messages having a channel value of 0.
>There's no way for fluidsynth to display the current router config, which makes knowing what the default is like for the layperson.
Right, but you can start fluidsynth application with -v option to see details about MIDI messages received by the synthesizer.
jjc
> Message du 26/04/21 18:33
> De : "Muziker Mammoth" <muzikermammoth@gmail.com>
> A : fluid-dev@nongnu.org
> Copie à :
> Objet : Re: [fluid-dev] fluid-dev Digest, Vol 213, Issue 7
>
>The router config i used is this:router_clear
> router_begin note
> router_chan 0 15 0 0
> router_end
> router_begin pbend
> router_chan 0 15 0 0
> router_end
>
>One thought though, the man page says for example: router_chan 0 15 a b is input*a+b, but i've used 0 0 instead.> the only case the message would be altered is when the MIDI input channel x is greater then synth.midi-channels setting.> router routes silently all MIDI channel x (16,17,...) message to channel (15).But the synth.midi-channels in the default config here is 16, and the midi channels that i use are all between 0-15. There's no way for fluidsynth to display the current router config, which makes knowing what the default is like for the layperson.
>
_______________________________________________
fluid-dev mailing list
fluid-dev@nongnu.org
https://lists.nongnu.org/mailman/listinfo/fluid-dev
[Prev in Thread] | Current Thread | [Next in Thread] |