|
From: | Rene Salmon |
Subject: | Re: [Freeipmi-users] ipmi_open_inband no such device on Ibm e325 |
Date: | Fri, 24 Mar 2006 12:18:32 -0600 |
User-agent: | Thunderbird 1.5 (Macintosh/20051201) |
Hi, Thanks for the help. Here is the output of ipmi-locate. Probing KCS device using SMBIOS... done IPMI Version: 1.5 IPMI locate driver: SMBIOS IPMI locate driver: 0 IPMI interface: KCS BMC I2C device: (null) BMC memory base address: CA2 Register space: 0 Probing SMIC device using SMBIOS... FAILED Probing BT device using SMBIOS... FAILED Probing SSIF device using SMBIOS... FAILED Probing KCS device using ACPI... FAILED Probing SMIC device using ACPI... FAILED Probing BT device using ACPI... FAILED Probing SSIF device using ACPI... FAILED Probing KCS device using PCI... FAILED Probing SMIC device using PCI... FAILED Probing BT device using PCI... FAILED Probing SSIF device using PCI... FAILED KCS device default values: IPMI Version: 1.5 IPMI locate driver: DEFAULT IPMI locate driver: 0 IPMI interface: KCS BMC I2C device: (null) BMC I/O base address: CA2 Register space: 1 SMIC device default values: IPMI Version: 1.5 IPMI locate driver: DEFAULT IPMI locate driver: 0 IPMI interface: SMIC BMC I2C device: (null) BMC I/O base address: CA9 Register space: 1 BT device default values: SSIF device default values: IPMI Version: 1.5 IPMI locate driver: DEFAULT IPMI locate driver: 0 IPMI interface: SSIF BMC I2C device: /dev/i2c-0 BMC SMBUS slave address: 20 Register space: 1 Albert Chu wrote:
Hi Rene, Could you run the ipmi-locate tool so we can see what exactly is on that machine? Al -- Albert Chu address@hidden 925-422-5311 Computer Scientist High Performance Systems Division Lawrence Livermore National Laboratory ----- Original Message ----- From: Rene Salmon <address@hidden> Date: Friday, March 24, 2006 9:54 am Subject: [Freeipmi-users] ipmi_open_inband no such device on Ibm e325Hi list, I am very new to IPMI and I am hoping to get some help here.I have an IBM e325 server on which I am trying to run freeimpi and I am getting the following error when I try to run bmc-info:src/freeipmi# bmc-info ipmi_open_inband(): No such device Here is what i did: downloaded and installed these packages on a SuSe-9.3 e325. freeipmi-0.2.0-1.x86_64.rpm freeipmi-utils-0.2.0-1.x86_64.rpm freeipmi-devel-0.2.0-1.x86_64.rpm freeipmi-fish-0.2.0-1.x86_64.rpmAfter updating the BMC firmware and the BIOS on the server I set up the following in BIOS settings.* Advanced Setup - Console Redirection - Console Redirection: On-board COM A - Baud Rate: 9600 - Console Type: vt100 - Flow Control: CTS/RTS - Console connection: Direct - Continue C.R. after POST: On - Baseboard Management Controller - Change COM port Setting: Yes - COM post on BMC: IPMB Any idea as to what might be the problem? Thank you Rene -- - -- Rene Salmon Tulane University Center for Computational Science Richardson Building 310 New Orleans, LA 70118 http://www.ccs.tulane.edu Tel 504-862-8393 Fax 504-862-8392 _______________________________________________ Freeipmi-users mailing list address@hidden http://lists.gnu.org/mailman/listinfo/freeipmi-users
-- - -- Rene Salmon Tulane University Center for Computational Science Richardson Building 310 New Orleans, LA 70118 http://www.ccs.tulane.edu Tel 504-862-8393 Fax 504-862-8392
[Prev in Thread] | Current Thread | [Next in Thread] |