[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: gnokiid & Nokia 6610 & FBUS cable (PL2303) & GPRS

From: Panagiotis Astithas
Subject: Re: gnokiid & Nokia 6610 & FBUS cable (PL2303) & GPRS
Date: Mon, 05 Apr 2004 17:25:37 +0300
User-agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.6) Gecko/20040313

Petr Spodniak wrote:
V po, 05. 04. 2004 v 11:02, Pawel Kot píše:

On Mon, 5 Apr 2004, Petr Spodniak wrote:

I using Nokia 6610 with USB FBUS cable based on Prolific PL2303 chip and
gnokiid as modem driver. I try test GPRS connection and has no any
response after command AT+CGDCONT...

Why do you want to use gnokiid with Nokia 6610?

because I mean that this is only way to use AT commands with my phone. I
using FreeBSD and have not infra port on my notebook. After connect
cable to computer USB driver create the ucom device (serial over USB).
But this is not usable by ppp daemon or tip command. When I use gnokiid
I can use small set of AT commands.

What is the problem with ucom? I use it daily, albeit not with a cell phone. Does the driver attach to the device? Can you post the output of "usbdevs -v"? Can you also show the error from ppp's log?

Panagiotis Astithas
Electrical & Computer Engineer, PhD
Network Management Center
National Technical University of Athens, Greece

reply via email to

[Prev in Thread] Current Thread [Next in Thread]