[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Wavecom configuration

From: Martyn
Subject: RE: Wavecom configuration
Date: Thu, 17 Sep 2009 16:28:12 +0100

Just got back in and this one on the screen
GNOKII Version 0.6.22
Telephone interface init failed: Command timed out.
Cannot unlock device.
Command timed out.
Any ideas please

From: Martyn [mailto:address@hidden
Sent: 17 September 2009 14:44
To: 'Discussion forum for gnokii users.'
Subject: RE: Wavecom configuration

After a little bit of digging I found the following: -
port = /dev/ttyS0
model = AT
initlength = default
connection = serial
use_locking = no
serial_baudrate = 19200
handshake = hardware
connect_script =
disconnect_script =

smsc_timeout = 10

allow_breakage = 0
bindir = /usr/sbin/
TELEPHONE = 12345678

debug = off
rlpdebug = off
xdebug = off
However when I run the command gnokii --identify it just sits at the following wit hthe cursor flashing: -
gnokii --identify
GNOKII Version 0.6.22
For info..
dmesg | grep tty
[  116.322431] console [tty0] enabled
[  118.870846] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[  118.871403] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

From: address@hidden [mailto:address@hidden On Behalf Of Martyn
Sent: 17 September 2009 14:29
To: address@hidden
Subject: Wavecom configuration

Hi Group, I have just had my new Wavecom Fastrack Supreme delivered, I'm trying to work out what configuration I need for my .gnokiirc file.

I'm running Ubuntu 8.04 and have installed Gnokii in the following way.
apt-get gnokii

Now I need to create the gnokiirc and I have not got a clue where to go from here, is there a site that I can go check out at all, I have searched Google but I guess I'm searching for the wrong thing as I get nothing credible returned.

The Wavecom is connoted to my Serial port.

Sorry if the above is a little vague, this is the first time I have used a GSM modem along with using Gnokii for the first time

Looking forward to learning though


reply via email to

[Prev in Thread] Current Thread [Next in Thread]