[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Wavecom configuration

From: Martyn
Subject: RE: Wavecom configuration
Date: Thu, 17 Sep 2009 21:23:17 +0100

Daniele I appreciate your reply and I'm trying best to understand, where in
the command line would I put that and also could I add it to the
configuration file.

Sorry but I'm a complete novice here, only been at this since late this
afternoon and before that never touched either products

Thanks Daniele

-----Original Message-----
From: address@hidden
[mailto:address@hidden On Behalf Of
Daniele Forsi
Sent: 17 September 2009 21:18
To: Discussion forum for gnokii users.
Subject: Re: Wavecom configuration

2009/9/17 Martyn:

> Cannot read the SMSC number from your phone. If the sms send will 
> fail, please use --smsc option explicitely giving the number.
> At the end it says:
> SMS Send failed (Command timed out.)
> Serial device: closing device
> So close but yet not sure how close, where should I go from here please.

do what the message above says, add --smsc to --sendsms command

--smsc wants the phone number of the service center which is usually stored
on the SIM card and gnokii should be able to read it automatically, or you
can read it with gnokii --getsmsc but in your case it seems it doesn't work
so either put the SIM in a phone and look up the number in phone menus or
ask it to the customer service of your provider
Daniele Forsi

gnokii-users mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]