[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Partial AT command support ? Return from experience...

From: Daniele Forsi
Subject: Re: Partial AT command support ? Return from experience...
Date: Thu, 1 Jul 2010 14:56:22 +0200

Dear sani,

thank you for you detailed description, however it's missing 2
important things: the gnokii version you are using and the debug

If you aren't using version 0.6.29 please do your tests again with
that version (and turn off the phone between tests just to be sure);

For debug logs see

>With bluetooth, it works like a charm, with the simplest config:

> model = AT

that's strange because earlier Series 40 phones don't allow reading
SMS with AT (and Nokia 7230 is a Series 40 6th ed. which got little
testing with gnokii)

> Two questions at end :-)
> - Is it correct to state that AT command set could be affected by the
> communication port, i.e full featured with bluetooth and restricted with 
> cable ?

actually you didn't show which AT commands that work via Bluetooth
fail with cable

> - Is there a known way to bypass this and use the genuine CA-126 nokia cable 
> to
> prevent bluetooth use ?

with connection = dku2libusb as you tried, see
and note that the modules to blacklist are not acm_*

Daniele Forsi

reply via email to

[Prev in Thread] Current Thread [Next in Thread]