gpsd-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [gpsd-users] gps source detection problem (GNS1301 receiver, serial


From: Gary E. Miller
Subject: Re: [gpsd-users] gps source detection problem (GNS1301 receiver, serial port, gpsd 3.15 and current git, ARM cortex A8)
Date: Fri, 2 Oct 2015 11:58:25 -0700

Yo Arndt!

On Fri, 2 Oct 2015 09:24:54 +0200
Arndt Kritzner <address@hidden> wrote:

> > If you set the port properly before starting gpsd then you avoid
> > the lengthy autobaud sequence.  You can also compile gpsd for
> > just the GPS you are using to avoid trying to probe for GPS you
> > do not support.
> 
> this is what I did. In my case the autobaud sequence never succeeds
> (at least not for some hours).

If you set the port to match the GPS before starting gpsd then the
problem is not related to the autobaud.  A good look with -D6 will
likely show your GPS type was not properly detected, maybe due to
over aggressive removal of unwanted GPS types.

RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
        address@hidden  Tel:+1 541 382 8588

Attachment: pgpOV7g6KMAGd.pgp
Description: OpenPGP digital signature


reply via email to

[Prev in Thread] Current Thread [Next in Thread]