|Subject:||GPSD - NTRIP Client|
|Date:||Thu, 9 Jan 2020 12:57:05 -0500|
I have been using GPSD for the past 5 year with a u-blox GPS and have been pleased with the performance. The project that uses this configuration is about to go through a redesign and I have been trying to prototype part of the configuration. The current prototype consist of :
RaspberryPi 4 running Buster OS
Raspian 4.19 Sept2019 release
GPSD (Version 3.17 ) was installed from app-get
GPS : u-blox – ZED-F9P
We are using the F9P so that the system can get to RTK accuracy.
For RTK base-station reference the project will be using NTRIP casters. Since we are in NewYork the initial testing is using the NYS CORS network. I have been able to use the U-Center application ( ublox software) and connect to the CORS network and push this data to the F9P.
When I have tried using the “ntrip” command line option as a part of gpsd, gpsd reports the following error:
gpsd:ERROR: ntrip stream connect error -2 in req probe
gpsd:ERROR: initial GPS device ntrip://UUUUUUUUU:address@hidden:8082/NYPF open failed
Here is the NTRIP listing for the NYS CORS network:
MountPoint Single Site Satellites Type Message Type Port ProductName
NYPF Pittsford – NYPF GGG Single site RTCM3.x(MSM5) 8082 R_NYPF
This is the command string I am using:
gpsd -n /dev/ttyACM0 ntrip://UUUUUUUUUUUU:address@hidden:8082/NYPF -N -D 5 ( username and password are filled out correctly )
gpsd is getting valid Lat/Lon from the device.
How can I get gpsd to use the NTRIP data from NYS CORS?
If you need more information let me know.
|[Prev in Thread]||Current Thread||[Next in Thread]|