[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Info-gama] Gama usage question

From: Aleš Čepek
Subject: Re: [Info-gama] Gama usage question
Date: Wed, 5 Dec 2012 18:07:42 +0100

Greg, your answer is 100% perfect, I cannot add anything more.

On 5 December 2012 15:12, Greg Troxel <address@hidden> wrote:

  I have a large point-cloud. I would like to convert coordinate
  systems, a 7-DOF rotate, translate, and scale.

My quick reaction is that gama isn't the right tool, since it's about
estimating coordinates given observations.  If you already have an
internally-consistent point cloud, then you aren't estimating

I think your problem has two sub-parts:

  estimating the rotation/translation/scale

  applying it

Applying it is similar to datum transformation, except that datum
transformations are typically small angles.

It may be that part of the gama code is helpful.

Given only two control points, I would think you could

  transform the control points real coordintes to ECEF XYZ (via proj4)

  compute translation, scale

  compute/choose an orientation, because you're down a control point

pretty easily, with the last two steps being done with a calculator

Then, you could end up with rotate and translate matrices, and apply
them with octave.

If you had more control points, you'd be in a least-squares situation
(and better off data wise with a harder processing problem, really :-).

It may be that having framed the problem of multiple control points with
coordinates in two different systems, you can write code to use the
solver in gama to solve that different problem.  But I'd expect the bulk
of gama to be about computing the partial derivatives of the types of
observations used in surveying.

Info-gama mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]