[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Documentation suggestion
From: |
Keith OHara |
Subject: |
Re: Documentation suggestion |
Date: |
Thu, 25 Apr 2013 05:11:55 +0000 (UTC) |
User-agent: |
Loom/3.14 (http://gmane.org/) |
Arno Waschk <hamamatsu <at> gmx.de> writes:
> may i suggest an easier solution for a snippet contained in the 2.17
> (and older) documentation?
> in 1.3.1 one of the last snippets shows how to engrave a delayed
> turn, with a lot of complicated overrides.
> i found the following far easier:
> c2*2/3 ( s2*1/3\turn d4.) c8
That is a better way to write it, because the position of the turn adjusts
if the line is tight or loose. If you use parallel music then the c2
can be full-length, which might be important for someone depending on midi.
The documentation example should probably show a general solution,
including accidentals that behave under transposition, and how to get
the usual note-space for the turn. That makes the example complicated,
but if it is easy for users to remove any unnecessary parts, extra detail
does little harm.
I added an alternative snippet at
<http://lsr.dsi.unimi.it/LSR/Item?id=877>