ltib
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Ltib] Qtopia 2


From: Paolo Cremonese
Subject: RE: [Ltib] Qtopia 2
Date: Fri, 18 Dec 2009 09:38:57 +0100

Hi Kevin,
I also follow your suggestion doing a distclean.
There isn't any qtopia directory in my rpm/BUILD.
Rebuilding all, there is no difference.

I have opened the qtopia-2.2.0-1.arm.rpm package, and in the opt dir,
only lib is present. Is this OK?

Best Regards,
Paolo

On lun, 2009-12-14 at 18:49 +0100, Kevin Wells wrote:
> Hmm, I saw this *once* on the 3250 a while back, but I was
> experimenting with some changes at the time and discounted
> it as something I did. I did do a recent test and the entire
> /opt/qtopia/tree (qt2) area built fine.
> 
> Can one of you please send over defconfig.dev file and I'll
> try it once here? It might also help to do a distclean and
> manually erase the qtopia directory in rpm/BUILD if it
> exists.
> 
> thanks,
> Kevin
> 
> 
> > -----Original Message-----
> > Subject: RE: [Ltib] Qtopia 2
> > 
> > Hi Paolo,
> > 
> > I faced the same problem when I tried to build Qtopia for the PHY3250. No
> > binaries are created even if the build is successfull... I only get the
> > fonts folder.
> > 
> > I also have some problems building the more recent version of Qtopia.
> > 
> > Regards, Pierre-Luc
> > 
> > Objet : Re: [Ltib] Qtopia 2
> > 
> > Hi Paolo,
> > 
> > It depends on platform, but that looks reasonable.  For the imx27 I
> > have:  rpm/RPMS/arm/qtopia-2.2.0-1.arm.rpm
> > 
> > An extract of the output for the rpm query is:
> > $ rpm --root `pwd`/rootfs -ql qtopia
> > 
> > //etc
> > //etc/firstuse
> > //etc/rc.d
> > //etc/rc.d/init.d
> > //etc/rc.d/init.d/qtopia
> > //opt
> > //opt/Qtopia
> > //opt/Qtopia/apps
> > //opt/Qtopia/apps/Applications
> > //opt/Qtopia/apps/Applications/.directory
> > //opt/Qtopia/apps/Applications/addressbook.desktop
> > //opt/Qtopia/apps/Applications/calculator.desktop
> > .....
> > //opt/Qtopia/bin
> > //opt/Qtopia/bin/addressbook
> > //opt/Qtopia/bin/appearance
> > //opt/Qtopia/bin/appservices
> > //opt/Qtopia/bin/buttoneditor
> > //opt/Qtopia/bin/calculator
> > //opt/Qtopia/bin/camera
> > //opt/Qtopia/bin/clock
> > //opt/Qtopia/bin/datebook
> > //opt/Qtopia/bin/embeddedkonsole
> > ....
> > 
> > I suspect you have build errors.  The qtopia build is nasty and so can
> > fail undetected.
> > 
> > NOTE: I don't have either your platform or the imx27 so cannot test the
> > actual rpm.
> > 
> > Regards, Stuart
> > 
> > Paolo Cremonese wrote:
> > > Hi Stuart,
> > > I'm sorry, but it does not change.
> > > the rpm is
> > >
> > > 'pwd'/rpm/RPMS/arm/qtopia-2.2.0-1.arm.rpm
> > >
> > > is it correct?
> > >
> > > Best Regards,
> > > Paolo
> > >
> > > On lun, 2009-12-14 at 08:45 +0000, Stuart Hughes wrote:
> > >> Hi Paolo,
> > >>
> > >> Make sure you have it enabled properly in the config system (./ltib -m
> > >> config).  If it is, try force rebuilding with:
> > >> ./ltib -p qtopia -f
> > >>
> > >> Regards, Stuart
> > >>
> > >> Paolo Cremonese wrote:
> > >>> Hi Stuart,
> > >>> You are right.
> > >>> I follow your suggestion, and my rpm seems contains only fonts.
> > >>>
> > >>> How can I get the right one?
> > >>>
> > >>> Best regards,
> > >>> Paolo
> > >>>
> > >>> On ven, 2009-12-11 at 16:54 +0000, Stuart Hughes wrote:
> > >>>> Hi Paolo,
> > >>>>
> > >>>> Check the rpm has built and installed correctly:
> > >>>>
> > >>>> $ rpm --root `pwd`/rootfs -ql qtopia
> > >>>>
> > >>>> This will list the installed files/directories for that package.
> > >>>>
> > >>>> Regards, Stuart
> > >>>>
> > >>>> Paolo Cremonese wrote:
> > >>>>> Hi All,
> > >>>>> I have configured my image (phy3250) with Qtopia 2 package:
> > >>>>> The image building is successfully, but on running the following
> > message
> > >>>>> is printed on the console:
> > >>>>>
> > >>>>> /etc/rc.d/init.d/qtopia: line 55: cd: /opt/Qtopia/bin: No such file
> > or
> > >>>>> directory
> > >>>>>
> > >>>>> In fact, in the /opt/Qtopia theare isn't any bin dir, only a lib dir
> > >>>>> containing fonts.
> > >>>>>
> > >>>>> Any suggestion?
> > >>>>>
> > >>>>> Thanks in advance,
> > >>>>> Paolo
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>> _______________________________________________
> > >>>>> LTIB home page: http://ltib.org
> > >>>>>
> > >>>>> Ltib mailing list
> > >>>>> address@hidden
> > >>>>> http://lists.nongnu.org/mailman/listinfo/ltib
> > >>>>>
> > >>>
> > >
> > >
> > 
> > 
> > _______________________________________________
> > LTIB home page: http://ltib.org
> > 
> > Ltib mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/ltib
> > 
> > 
> > _______________________________________________
> > LTIB home page: http://ltib.org
> > 
> > Ltib mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/ltib





reply via email to

[Prev in Thread] Current Thread [Next in Thread]