[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[monit] Linking monit to lm-sensors

From: Patrick Zaloum
Subject: [monit] Linking monit to lm-sensors
Date: Wed, 5 Mar 2008 21:17:49 -0500

I was wondering if anyone has had any experience linking monit to lm-sensors readouts to monitor for excessively high temperatures, low fan speeds, etc. or if anyone would have an idea how to go about it. Essentially, running 'sensors' provides a readout of your current state as shown below, how could it be watched by monit?
# sensors
Adapter: ISA adapter
Vcore:     +1.27 V  (min =  +1.15 V, max =  +1.50 V)
+12V:     +11.46 V  (min = +11.40 V, max = +12.62 V)
+3.3V:     +3.22 V  (min =  +3.14 V, max =  +3.47 V)
+5V:       +5.25 V  (min =  +4.66 V, max =  +5.35 V)
CPU Fan:   1811 RPM  (min =  600 RPM, div = 32)
MB Temp:     +32°C  (high =   +50°C, hyst =   +45°C)
CPU Temp:  +31.0°C  (high = +60.0°C, hyst = +50.0°C)
Adapter: ISA adapter
Core 0:      +26°C  (high =   +85°C)
Adapter: ISA adapter
Core 1:      +29°C  (high =   +85°C)

reply via email to

[Prev in Thread] Current Thread [Next in Thread]