[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Initialization of load_path at startup
From: |
John Swensen |
Subject: |
Initialization of load_path at startup |
Date: |
Wed, 14 May 2008 08:02:21 -0400 |
I am having a strange problem with the load_path while working on
OctaveDE. Below I have listed the results of the path() command just
after startup. I have been searching for how the load_path is
initialized at startup and cannot figure out how in the world that
extra line is getting injected when I start up octave_main from
OctaveDE, and it is not happening when simply running octave.
First 3 lines of output of path() command in Octave when executed from
Octave.app
.
/Applications/Octave.app/Contents/Resources/share/octave/site/m/startup
/Applications/Octave.app/Contents/Resources/libexec/octave/3.0.1/oct/
i386-apple-darwin8.9.1
First 3 lines of output of path() command in Octave when running in
OctaveDE.app
.
./Applications/Octave.app/Contents/Resources/share/octave/site/m
/Applications/Octave.app/Contents/Resources/share/octave/site/m/startup
John Swensen
- Initialization of load_path at startup,
John Swensen <=