[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Paparazzi-devel] Tiny 2 and IR, gyro settings

From: Uttam Chandrashekhar
Subject: [Paparazzi-devel] Tiny 2 and IR, gyro settings
Date: Mon, 14 Jan 2008 06:57:54 -0800 (PST)

Hi guys,

I got the IR boards working, I replaced the low drift opamps in a static free environment ( Wrist strap and mat )! On the XY board, neutrals across the 2 axis vary a bit, one says 1.9 V and the other says 2.1V. Is this OK? I have some questions regarding the IR sensors and Gyro sensor settings in the funjet1.xml file. Since this will be installed in a different plane, I'll have to tweak the settings.

 <section name="INFRARED" prefix="IR_">
<define name="ADC_IR1_NEUTRAL" value="512"/>
<define name="ADC_IR2_NEUTRAL" value="512"/>
<define name="ADC_TOP_NEUTRAL" value="512"/>

<define name="LATERAL_CORRECTION" value="1."/>

<define name="LONGITUDINAL_CORRECTION" value="1."/>
<define name="VERTICAL_CORRECTION" value="1.5"/>

<define name="HORIZ_SENSOR_TILTED" value="1"/>
<define name="IR2_SIGN" value="-1"/>
<define name="TOP_SIGN" value="-1"/>

<define name="ROLL_NEUTRAL_DEFAULT" value="-2.5" unit="deg"/>
<define name="PITCH_NEUTRAL_DEFAULT" value="6" unit="deg"/>

<define name="CORRECTION_UP" value="1."/>
<define name="CORRECTION_DOWN" value="1."/>
<define name="CORRECTION_LEFT" value="1."/>
<define name="CORRECTION_RIGHT" value="1."/>

In the above bit of code, what does the Neutral value of "512" signify? Why is it 512?

What do the correction values mean? What does the IRx_SIGN signify? What do the other variables mean ( roll and pitch neutral def, and the up down left right corrections )?

Since the IR sensors are working OK, what would be by next step? Can I go ahead and plug it into the Tiny and flash the APcode ( I replaced the ap code with the tunnel for GPS prog )?

-Thanks, you guys are the BEST!

Looking for last minute shopping deals?

Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.
reply via email to

[Prev in Thread] Current Thread [Next in Thread]