[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Paparazzi-devel] Tiny 2 and messages

From: Yves Touchette
Subject: RE: [Paparazzi-devel] Tiny 2 and messages
Date: Wed, 16 Jan 2008 07:51:58 -0500

Unless you changed the configuration in your aircraft file, the datalink messages are sent on Uart1 and the download header in on Uart0.

Could you confirm which connnector you are using on the tiny? and what's in your aircraft configuration?


Date: Wed, 16 Jan 2008 02:09:04 -0800
From: address@hidden
Subject: Re: [Paparazzi-devel] Tiny 2 and messages
To: address@hidden

Hi Pascal,

OK, I edited it again and it reads:

/home/dcenterprises/paparazzi/paparazzi3/sw/ground_segment/tmtc/link -d /dev/ttyUSB0 -transport xbee -s 9600

Still nothing on the GCS. Should I reflash the AP after changing all this?


----- Original Message ----
From: Pascal Brisset <address@hidden>
To: address@hidden
Sent: Wednesday, January 16, 2008 3:10:52 PM
Subject: Re: [Paparazzi-devel] Tiny 2 and messages

Uttam Chandrashekhar wrote:
> Thanks. I changed the Data link agent line to this:
> /home/dcenterprises/paparazzi/paparazzi3/sw/ground_segment/tmtc/link
> -d /dev/ttyUSB0 -s 9600
Did you remove the "-transport xbee" ? You should not ...

> And re executed it. Still nothing on the GCS :( Whats wrong??
> -Uttam
> ------------------------------------------------------------------------
> Looking for last minute shopping deals? Find them fast with Yahoo!
> Search.
> <*>
> ------------------------------------------------------------------------
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden

Paparazzi-devel mailing list

Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]