[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Apologies re: Last Post

From: C.KUO
Subject: Re: [Paparazzi-devel] Apologies re: Last Post
Date: Wed, 22 Apr 2009 09:19:35 +0200
User-agent: Internet Messaging Program (IMP) H3 (4.1.4)

Hi there

Just change the min and max value of the motor other way around, then it should work. I did the same.



引述 Stephen L Hulme <address@hidden>:

My sincerest apologies for time wasting re: video strip switch information/help request.

I forgot to plug the video receiver into the laptop. Of course it wouldn't work .It does now.

So I have one request only:as I noted in my previous post:

I reversed the funjet1.xml command section as follows to get the surfaces moving in the right direction from the RC transmitter as set out here:

<!-- commands section -->
<servo name="MOTOR" no="0" min="2000" neutral="2000" max="1000"/> <servo name="AILEVON_LEFT" no="2" min="1880" neutral="1500" max="1130"/>
    <servo name="AILEVON_RIGHT" no="6" min="1170" neutral="1515" max="1980"/>

Unfortunately the throttle strip setting always reads the reverse of the RC transmitter throttle stick position and the actions of the motor.

Motor off stick towards me -100% reading. and vice versa.

Can I change this?


Aerospace Engineering, MEng
Mechanical Engineering, PhD
Research Associate
Department of Materials Science and Engineering
Saarland University
Campus Dudweiler, Beethovenstrasse
66125 Saarbr?ken

reply via email to

[Prev in Thread] Current Thread [Next in Thread]