[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] UART1 stopped working

From: Daniel Morgan
Subject: Re: [Paparazzi-devel] UART1 stopped working
Date: Wed, 27 May 2009 08:46:30 -0600

It could also be that you fried your uart..They are pretty sensitive and i have actually had a few go out on me lately. Just need to replace the LPC

On Wed, May 27, 2009 at 8:35 AM, Cédric Marzer <address@hidden> wrote:
I was just trying to answer Andrea's problem, but my bloody email client
doesn't put the > automaticaly.
Anyway I think Andrea's tunnel is working with USB but not with UART1.
I also think it is an airframe file problem with the wrong settings for the


>If tunnel is allowing you to talk to the GPS, then both of your UARTs
>are working fine.  Tunnel pretty much takes what it heres on UART1 and
>repeats it on UART0, and vice versa.

>I would look in your airframe file.  Make sure you have configured to
>use the proper serial ports.  For Tiny 2.11, GPS should use UART0 and
>telemetry should use UART1.


Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]