[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Paparazzi-devel] Reply to "PPM encoder : channels not responding when m

From: Kurtis Kraemer
Subject: [Paparazzi-devel] Reply to "PPM encoder : channels not responding when moving stick, quickly on R/C (Philippe Volivert)"
Date: Tue, 9 Nov 2010 19:30:12 -0500

I was having similar problems with slow servo response using Spektrum equipment and the PPM encoder. I was powering everything (Rx, Encoder, and servos) all form the autopilot (Tiny 2.11).

I then redid the wiring  as shown in the diagram in the link below, with the servos and Rx powered independently.

After that it worked much better. There is still a slight delay (half second or less), but I was able to fly my Easystar just fine. Hopefully this works for you.

Ottawa, Canada

reply via email to

[Prev in Thread] Current Thread [Next in Thread]