[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] servo output over i2c oder ppm sum stream

From: Felix Ruess
Subject: Re: [Paparazzi-devel] servo output over i2c oder ppm sum stream
Date: Tue, 6 Aug 2013 14:35:40 +0200

Hi Marius,

as you noticed this is currently not implemented for the stm32.
If you want to start writing one, I can probably help out a little where needed... but I don't have much time for it.

Cheers, Felix

On Thu, Jul 25, 2013 at 1:58 PM, Prof. Dr.-Ing. Heinrich Warmers <address@hidden> wrote:
Hi Marius,
a solution over i2c is this:


Marius Pfeffer schrieb:

Is there currently a easy way to put out all servo signals as a ppm sum stream on one pin ?

I found servos_ppm_hw.h , but only in the lpc folder and not in the stm32 which i think i would need for the LisaMv2.

I hope somebody has a solution.


_______________________________________________ Paparazzi-devel mailing list address@hidden

Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]