[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] pt1000 not working

From: Prof. Dr.-Ing. Heinrich Warmers
Subject: Re: [Paparazzi-devel] pt1000 not working
Date: Fri, 23 Aug 2013 01:45:47 +0200
User-agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; de-DE; rv:1.4) Gecko/20030619 Netscape/7.1 (ax)

if you have 2 modules exchange them also with the level converter.
Then you know if there is something is wrong  with the hardware.
Also you can look to the  i2c (3V) bus wiht a logic sniffer.


Árni Þorvaldsson schrieb:
Hi all, I am trying to get the pt1000 sensor to work with my tiny. I am making two airframes and in one the sensor is working 100%, but in the other airframe the sensor always shows zero. I am using tiny 2.11 and a lever converter. the setup is the same as in the wiki.

I am getting response from the sensor but it is always zero, I have gone over the connections several times without any luck.
Has anyone experienced this

regards Arni

_______________________________________________ Paparazzi-devel mailing list address@hidden

reply via email to

[Prev in Thread] Current Thread [Next in Thread]