paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] strange error message appeared with ddatalink


From: shaunger
Subject: Re: [Paparazzi-devel] strange error message appeared with ddatalink
Date: Sun, 8 Jun 2014 17:52:38 -0400

Hi,

Your checksum for the autopilot and the server/gcs is different. 
As the error message says, you can run the server with -no_md5_check which will 
bypass the checksum for the messages or clean and recompile everything which 
should update the checksums. I have never actually run the code on an autopilot 
so I am not familiar with the steps needed to deploy to a real board so you 
will need to ensure that the newly compiled code gets transferred toy our 
autopilot also.

Regards,
Shaun.

Sent from my iPad

> On Jun 8, 2014, at 5:37 PM, evan igor <address@hidden> wrote:
> 
> hi,
> 
> this what happened when i was trying to connect the paparazzi liza/m to CGS
> 
> 
> <paparazzi.png>
> ‚Äč
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



reply via email to

[Prev in Thread] Current Thread [Next in Thread]