Re: [Qemu-devel] [PATCH v5 02/10] softfloat: Resolve type mismatches between declaration and implementation

[Aurelien Jarno]

On Mon, Mar 07, 2011 at 01:34:05AM +0100, Andreas Färber wrote:
> The original SoftFloat 2.0b library avoided the use of custom integer types
> in its public headers. This requires the definitions of int{8,16,32,64} to
> match the assumptions in the declarations. This breaks on BeOS R5 and 
> Haiku/x86,
> where int32 is defined in {be,os}/support/SupportDefs.h in terms of a long
> rather than an int. Spotted by Michael Lotz.
> 
> Since QEMU already breaks this distinction by defining those types just above,
> do use them for consistency and to allow #ifndef'ing them out as done for
> [u]int16 on AIX.
> 
> Note that the BeOS/Haiku types are exact-width types though.
> 
> v3:
> * Split off as intermediate step.
> 
> v2:
> * Rebased.
> 
> Cc: Michael Lotz <address@hidden>
> Cc: Peter Maydell <address@hidden>
> Signed-off-by: Andreas Färber <address@hidden>
> ---
>  fpu/softfloat.h |   68 +++++++++++++++++++++++++++---------------------------
>  1 files changed, 34 insertions(+), 34 deletions(-)

Reviewed-by: Aurelien Jarno <address@hidden>
 
> diff --git a/fpu/softfloat.h b/fpu/softfloat.h
> index 9e10727..29492bc 100644
> --- a/fpu/softfloat.h
> +++ b/fpu/softfloat.h
> @@ -255,25 +255,25 @@ void float_raise( int8 flags STATUS_PARAM);
>  
> /*----------------------------------------------------------------------------
>  | Software IEC/IEEE integer-to-floating-point conversion routines.
>  
> *----------------------------------------------------------------------------*/
> -float32 int32_to_float32( int STATUS_PARAM );
> -float64 int32_to_float64( int STATUS_PARAM );
> +float32 int32_to_float32( int32 STATUS_PARAM );
> +float64 int32_to_float64( int32 STATUS_PARAM );
>  float32 uint32_to_float32( unsigned int STATUS_PARAM );
>  float64 uint32_to_float64( unsigned int STATUS_PARAM );
>  #ifdef FLOATX80
> -floatx80 int32_to_floatx80( int STATUS_PARAM );
> +floatx80 int32_to_floatx80( int32 STATUS_PARAM );
>  #endif
>  #ifdef FLOAT128
> -float128 int32_to_float128( int STATUS_PARAM );
> +float128 int32_to_float128( int32 STATUS_PARAM );
>  #endif
> -float32 int64_to_float32( int64_t STATUS_PARAM );
> -float32 uint64_to_float32( uint64_t STATUS_PARAM );
> -float64 int64_to_float64( int64_t STATUS_PARAM );
> -float64 uint64_to_float64( uint64_t STATUS_PARAM );
> +float32 int64_to_float32( int64 STATUS_PARAM );
> +float32 uint64_to_float32( uint64 STATUS_PARAM );
> +float64 int64_to_float64( int64 STATUS_PARAM );
> +float64 uint64_to_float64( uint64 STATUS_PARAM );
>  #ifdef FLOATX80
> -floatx80 int64_to_floatx80( int64_t STATUS_PARAM );
> +floatx80 int64_to_floatx80( int64 STATUS_PARAM );
>  #endif
>  #ifdef FLOAT128
> -float128 int64_to_float128( int64_t STATUS_PARAM );
> +float128 int64_to_float128( int64 STATUS_PARAM );
>  #endif
>  
>  
> /*----------------------------------------------------------------------------
> @@ -303,14 +303,14 @@ float16 float16_maybe_silence_nan( float16 );
>  
> /*----------------------------------------------------------------------------
>  | Software IEC/IEEE single-precision conversion routines.
>  
> *----------------------------------------------------------------------------*/
> -int float32_to_int16_round_to_zero( float32 STATUS_PARAM );
> +int16 float32_to_int16_round_to_zero( float32 STATUS_PARAM );
>  unsigned int float32_to_uint16_round_to_zero( float32 STATUS_PARAM );
> -int float32_to_int32( float32 STATUS_PARAM );
> -int float32_to_int32_round_to_zero( float32 STATUS_PARAM );
> -unsigned int float32_to_uint32( float32 STATUS_PARAM );
> -unsigned int float32_to_uint32_round_to_zero( float32 STATUS_PARAM );
> -int64_t float32_to_int64( float32 STATUS_PARAM );
> -int64_t float32_to_int64_round_to_zero( float32 STATUS_PARAM );
> +int32 float32_to_int32( float32 STATUS_PARAM );
> +int32 float32_to_int32_round_to_zero( float32 STATUS_PARAM );
> +uint32 float32_to_uint32( float32 STATUS_PARAM );
> +uint32 float32_to_uint32_round_to_zero( float32 STATUS_PARAM );
> +int64 float32_to_int64( float32 STATUS_PARAM );
> +int64 float32_to_int64_round_to_zero( float32 STATUS_PARAM );
>  float64 float32_to_float64( float32 STATUS_PARAM );
>  #ifdef FLOATX80
>  floatx80 float32_to_floatx80( float32 STATUS_PARAM );
> @@ -413,16 +413,16 @@ INLINE float32 float32_set_sign(float32 a, int sign)
>  
> /*----------------------------------------------------------------------------
>  | Software IEC/IEEE double-precision conversion routines.
>  
> *----------------------------------------------------------------------------*/
> -int float64_to_int16_round_to_zero( float64 STATUS_PARAM );
> +int16 float64_to_int16_round_to_zero( float64 STATUS_PARAM );
>  unsigned int float64_to_uint16_round_to_zero( float64 STATUS_PARAM );
> -int float64_to_int32( float64 STATUS_PARAM );
> -int float64_to_int32_round_to_zero( float64 STATUS_PARAM );
> -unsigned int float64_to_uint32( float64 STATUS_PARAM );
> -unsigned int float64_to_uint32_round_to_zero( float64 STATUS_PARAM );
> -int64_t float64_to_int64( float64 STATUS_PARAM );
> -int64_t float64_to_int64_round_to_zero( float64 STATUS_PARAM );
> -uint64_t float64_to_uint64 (float64 a STATUS_PARAM);
> -uint64_t float64_to_uint64_round_to_zero (float64 a STATUS_PARAM);
> +int32 float64_to_int32( float64 STATUS_PARAM );
> +int32 float64_to_int32_round_to_zero( float64 STATUS_PARAM );
> +uint32 float64_to_uint32( float64 STATUS_PARAM );
> +uint32 float64_to_uint32_round_to_zero( float64 STATUS_PARAM );
> +int64 float64_to_int64( float64 STATUS_PARAM );
> +int64 float64_to_int64_round_to_zero( float64 STATUS_PARAM );
> +uint64 float64_to_uint64 (float64 a STATUS_PARAM);
> +uint64 float64_to_uint64_round_to_zero (float64 a STATUS_PARAM);
>  float32 float64_to_float32( float64 STATUS_PARAM );
>  #ifdef FLOATX80
>  floatx80 float64_to_floatx80( float64 STATUS_PARAM );
> @@ -522,10 +522,10 @@ INLINE float64 float64_set_sign(float64 a, int sign)
>  
> /*----------------------------------------------------------------------------
>  | Software IEC/IEEE extended double-precision conversion routines.
>  
> *----------------------------------------------------------------------------*/
> -int floatx80_to_int32( floatx80 STATUS_PARAM );
> -int floatx80_to_int32_round_to_zero( floatx80 STATUS_PARAM );
> -int64_t floatx80_to_int64( floatx80 STATUS_PARAM );
> -int64_t floatx80_to_int64_round_to_zero( floatx80 STATUS_PARAM );
> +int32 floatx80_to_int32( floatx80 STATUS_PARAM );
> +int32 floatx80_to_int32_round_to_zero( floatx80 STATUS_PARAM );
> +int64 floatx80_to_int64( floatx80 STATUS_PARAM );
> +int64 floatx80_to_int64_round_to_zero( floatx80 STATUS_PARAM );
>  float32 floatx80_to_float32( floatx80 STATUS_PARAM );
>  float64 floatx80_to_float64( floatx80 STATUS_PARAM );
>  #ifdef FLOAT128
> @@ -605,10 +605,10 @@ INLINE int floatx80_is_any_nan(floatx80 a)
>  
> /*----------------------------------------------------------------------------
>  | Software IEC/IEEE quadruple-precision conversion routines.
>  
> *----------------------------------------------------------------------------*/
> -int float128_to_int32( float128 STATUS_PARAM );
> -int float128_to_int32_round_to_zero( float128 STATUS_PARAM );
> -int64_t float128_to_int64( float128 STATUS_PARAM );
> -int64_t float128_to_int64_round_to_zero( float128 STATUS_PARAM );
> +int32 float128_to_int32( float128 STATUS_PARAM );
> +int32 float128_to_int32_round_to_zero( float128 STATUS_PARAM );
> +int64 float128_to_int64( float128 STATUS_PARAM );
> +int64 float128_to_int64_round_to_zero( float128 STATUS_PARAM );
>  float32 float128_to_float32( float128 STATUS_PARAM );
>  float64 float128_to_float64( float128 STATUS_PARAM );
>  #ifdef FLOATX80
> -- 
> 1.7.3.4
> 
> 
> 

-- 
Aurelien Jarno                          GPG: 1024D/F1BCDB73
address@hidden                 http://www.aurel32.net