[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [RFC v1 3/3] target-microblaze: Convert use-fpu to a CP
From: |
Alistair Francis |
Subject: |
Re: [Qemu-devel] [RFC v1 3/3] target-microblaze: Convert use-fpu to a CPU property |
Date: |
Fri, 15 May 2015 15:48:51 +1000 |
On Fri, May 15, 2015 at 3:22 PM, Peter Crosthwaite
<address@hidden> wrote:
> On Wed, May 13, 2015 at 11:08 PM, Alistair Francis
> <address@hidden> wrote:
>> Originally the use-fpu PVR bits were manually set for each machine. This
>> is a hassle and difficult to read, instead set them based on the CPU
>> properties.
>>
>> Signed-off-by: Alistair Francis <address@hidden>
>> ---
>>
>> hw/microblaze/petalogix_ml605_mmu.c | 4 ++--
>> target-microblaze/cpu-qom.h | 1 +
>> target-microblaze/cpu.c | 13 +++++++++++--
>> target-microblaze/translate.c | 6 +++---
>> 4 files changed, 17 insertions(+), 7 deletions(-)
>>
>> diff --git a/hw/microblaze/petalogix_ml605_mmu.c
>> b/hw/microblaze/petalogix_ml605_mmu.c
>> index 48c264b..f4e1cc5 100644
>> --- a/hw/microblaze/petalogix_ml605_mmu.c
>> +++ b/hw/microblaze/petalogix_ml605_mmu.c
>> @@ -71,9 +71,8 @@ static void machine_cpu_reset(MicroBlazeCPU *cpu)
>> env->pvr.regs[10] = 0x0e000000; /* virtex 6 */
>> /* setup pvr to match kernel setting */
>> env->pvr.regs[5] |= PVR5_DCACHE_WRITEBACK_MASK;
>> - env->pvr.regs[0] |= PVR0_USE_FPU_MASK | PVR0_ENDI;
>> + env->pvr.regs[0] |= PVR0_ENDI;
>> env->pvr.regs[0] = (env->pvr.regs[0] & ~PVR0_VERSION_MASK) | (0x14 <<
>> 8);
>> - env->pvr.regs[2] ^= PVR2_USE_FPU2_MASK;
>
> So I think this here will clear PVR2_FPU2 ...
>
>> env->pvr.regs[4] = 0xc56b8000;
>> env->pvr.regs[5] = 0xc56be000;
>> }
>> @@ -95,6 +94,7 @@ petalogix_ml605_init(MachineState *machine)
>>
>> /* init CPUs */
>> cpu = MICROBLAZE_CPU(object_new(TYPE_MICROBLAZE_CPU));
>> + object_property_set_int(OBJECT(cpu), 2, "xlnx.use-fpu", &error_abort);
>
> But here you are setting use-fpu to 2. Is this a functional change for
> ML605 board?
>
>> object_property_set_bool(OBJECT(cpu), true, "realized", &error_abort);
>>
>> /* Attach emulated BRAM through the LMB. */
>> diff --git a/target-microblaze/cpu-qom.h b/target-microblaze/cpu-qom.h
>> index 7bc5b81..ce3a574 100644
>> --- a/target-microblaze/cpu-qom.h
>> +++ b/target-microblaze/cpu-qom.h
>> @@ -62,6 +62,7 @@ typedef struct MicroBlazeCPU {
>> /* Microblaze Configuration Settings */
>> struct {
>> bool stackproc;
>> + uint8_t usefpu;
>> } cfg;
>>
>> CPUMBState env;
>> diff --git a/target-microblaze/cpu.c b/target-microblaze/cpu.c
>> index c08da19..c3a9a5d 100644
>> --- a/target-microblaze/cpu.c
>> +++ b/target-microblaze/cpu.c
>> @@ -89,10 +89,18 @@ static void mb_cpu_reset(CPUState *s)
>> | PVR2_USE_DIV_MASK \
>> | PVR2_USE_HW_MUL_MASK \
>> | PVR2_USE_MUL64_MASK \
>> - | PVR2_USE_FPU_MASK \
>> - | PVR2_USE_FPU2_MASK \
>
> If I have this straight, this suggests the property default value
> should be 2, and the ml605 board setting should be 1.
You are correct, I will fix this.
>
>> | PVR2_FPU_EXC_MASK \
>> | 0;
>> +
>> + if (cpu->cfg.usefpu) {
>> + env->pvr.regs[0] |= PVR0_USE_FPU_MASK;
>> + env->pvr.regs[2] |= PVR2_USE_FPU_MASK;
>> +
>> + if (cpu->cfg.usefpu > 1) {
>> + env->pvr.regs[2] |= PVR2_USE_FPU2_MASK;
>> + }
>> + }
>
> This should be handled at realize time. See pl330_realize for example
> of realize-time PVR ("cfg" in that case) population.
But the env state gets wiped out at reset, so the information will be lost.
I can tidy up the if logic though.
>
> To avoid churn, it might be easiest to convert the PVRs in chunks one
> by one (e.g. one patch for PVR0, then PVR2 etc etc. The existing |ing
> can be moved into realize for settings not worth propertyifying.
>
>> +
>> env->pvr.regs[10] = 0x0c000000; /* Default to spartan 3a dsp family. */
>> env->pvr.regs[11] = PVR11_USE_MMU | (16 << 17);
>>
>> @@ -154,6 +162,7 @@ static Property mb_properties[] = {
>> DEFINE_PROP_UINT32("xlnx.base-vectors", MicroBlazeCPU, base_vectors, 0),
>> DEFINE_PROP_BOOL("xlnx.use-stack-protection", MicroBlazeCPU,
>> cfg.stackproc,
>> true),
>> + DEFINE_PROP_UINT8("xlnx.use-fpu", MicroBlazeCPU, cfg.usefpu, 1),
>
> No need for xlnx prefix (FDT generic should trim the prefix).
I agree, but the base-vectors already had it. If the xlnx is unneeded
I'll remove
it from the base-vector as well.
Thanks,
Alistair
>
> Regards,
> Peter
>
>> DEFINE_PROP_END_OF_LIST(),
>> };
>>
>> diff --git a/target-microblaze/translate.c b/target-microblaze/translate.c
>> index 4068946..36cfc5c 100644
>> --- a/target-microblaze/translate.c
>> +++ b/target-microblaze/translate.c
>> @@ -1415,11 +1415,11 @@ static int dec_check_fpuv2(DisasContext *dc)
>>
>> r = dc->cpu->env.pvr.regs[2] & PVR2_USE_FPU2_MASK;
>>
>> - if (!r && (dc->tb_flags & MSR_EE_FLAG)) {
>> + if ((dc->cpu->cfg.usefpu != 2) && (dc->tb_flags & MSR_EE_FLAG)) {
>> tcg_gen_movi_tl(cpu_SR[SR_ESR], ESR_EC_FPU);
>> t_gen_raise_exception(dc, EXCP_HW_EXCP);
>> }
>> - return r;
>> + return (dc->cpu->cfg.usefpu == 2) ? 0 : PVR2_USE_FPU2_MASK;
>> }
>>
>> static void dec_fpu(DisasContext *dc)
>> @@ -1428,7 +1428,7 @@ static void dec_fpu(DisasContext *dc)
>>
>> if ((dc->tb_flags & MSR_EE_FLAG)
>> && (dc->cpu->env.pvr.regs[2] & PVR2_ILL_OPCODE_EXC_MASK)
>> - && !((dc->cpu->env.pvr.regs[2] & PVR2_USE_FPU_MASK))) {
>> + && (dc->cpu->cfg.usefpu != 1)) {
>> tcg_gen_movi_tl(cpu_SR[SR_ESR], ESR_EC_ILLEGAL_OP);
>> t_gen_raise_exception(dc, EXCP_HW_EXCP);
>> return;
>> --
>> 1.7.1
>>
>>
>
- [Qemu-devel] [RFC v1 0/3] Add Microblaze configuration options, Alistair Francis, 2015/05/14
- [Qemu-devel] [RFC v1 1/3] target-microblaze: Fix up indentation, Alistair Francis, 2015/05/14
- [Qemu-devel] [RFC v1 2/3] target-microblaze: Allow the stack protection to be disabled, Alistair Francis, 2015/05/14
- [Qemu-devel] [RFC v1 3/3] target-microblaze: Convert use-fpu to a CPU property, Alistair Francis, 2015/05/14
- Re: [Qemu-devel] [RFC v1 3/3] target-microblaze: Convert use-fpu to a CPU property, Peter Crosthwaite, 2015/05/15
- Re: [Qemu-devel] [RFC v1 3/3] target-microblaze: Convert use-fpu to a CPU property,
Alistair Francis <=
- Re: [Qemu-devel] [RFC v1 3/3] target-microblaze: Convert use-fpu to a CPU property, Peter Crosthwaite, 2015/05/15
- Re: [Qemu-devel] [RFC v1 3/3] target-microblaze: Convert use-fpu to a CPU property, Alistair Francis, 2015/05/15
- Re: [Qemu-devel] [RFC v1 3/3] target-microblaze: Convert use-fpu to a CPU property, Peter Crosthwaite, 2015/05/15
- Re: [Qemu-devel] [RFC v1 3/3] target-microblaze: Convert use-fpu to a CPU property, Alistair Francis, 2015/05/15
- Re: [Qemu-devel] [RFC v1 3/3] target-microblaze: Convert use-fpu to a CPU property, Peter Crosthwaite, 2015/05/15
- Re: [Qemu-devel] [RFC v1 3/3] target-microblaze: Convert use-fpu to a CPU property, Andreas Färber, 2015/05/15
- Re: [Qemu-devel] [RFC v1 3/3] target-microblaze: Convert use-fpu to a CPU property, Alistair Francis, 2015/05/17
- Re: [Qemu-devel] [RFC v1 3/3] target-microblaze: Convert use-fpu to a CPU property, Andreas Färber, 2015/05/17
- Re: [Qemu-devel] [RFC v1 3/3] target-microblaze: Convert use-fpu to a CPU property, Alistair Francis, 2015/05/17