[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PULL 26/36] tests/boot_linux_console: Add a SD card test for the Orange
From: |
Peter Maydell |
Subject: |
[PULL 26/36] tests/boot_linux_console: Add a SD card test for the OrangePi PC board |
Date: |
Thu, 12 Mar 2020 16:44:49 +0000 |
From: Philippe Mathieu-Daudé <address@hidden>
The kernel image and DeviceTree blob are built by the Armbian
project (based on Debian):
https://www.armbian.com/orange-pi-pc/
The SD image is from the kernelci.org project:
https://kernelci.org/faq/#the-code
If ARM is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:arm" tags.
Alternatively, this test can be run using:
$ avocado --show=console run -t machine:orangepi-pc
tests/acceptance/boot_linux_console.py
console: Uncompressing Linux... done, booting the kernel.
console: Booting Linux on physical CPU 0x0
console: Linux version 4.20.7-sunxi (address@hidden) (gcc version 7.2.1
20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019
console: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c5387d
[...]
console: sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec,
nowayout=0)
console: sunxi-mmc 1c0f000.mmc: Linked as a consumer to regulator.2
console: sunxi-mmc 1c0f000.mmc: Got CD GPIO
console: ledtrig-cpu: registered to indicate activity on CPUs
console: hidraw: raw HID events driver (C) Jiri Kosina
console: usbcore: registered new interface driver usbhid
console: usbhid: USB HID core driver
console: Initializing XFRM netlink socket
console: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
console: NET: Registered protocol family 10
console: mmc0: host does not support reading read-only switch, assuming
write-enable
console: mmc0: Problem switching card into high-speed mode!
console: mmc0: new SD card at address 4567
console: mmcblk0: mmc0:4567 QEMU! 60.0 MiB
[...]
console: EXT4-fs (mmcblk0): mounting ext2 file system using the ext4 subsystem
console: EXT4-fs (mmcblk0): mounted filesystem without journal. Opts: (null)
console: VFS: Mounted root (ext2 filesystem) on device 179:0.
console: Run /sbin/init as init process
console: EXT4-fs (mmcblk0): re-mounted. Opts:
block_validity,barrier,user_xattr,acl
console: Starting syslogd: OK
console: Starting klogd: OK
console: Populating /dev using udev: udevd[203]: starting version 3.2.7
console: /bin/sh: can't access tty; job control turned off
console: cat /proc/partitions
console: / # cat /proc/partitions
console: major minor #blocks name
console: 1 0 4096 ram0
console: 1 1 4096 ram1
console: 1 2 4096 ram2
console: 1 3 4096 ram3
console: 179 0 61440 mmcblk0
console: reboot
console: / # reboot
console: umount: devtmpfs busy - remounted read-only
console: EXT4-fs (mmcblk0): re-mounted. Opts: (null)
console: The system is going down NOW!
console: Sent SIGTERM to all processes
console: Sent SIGKILL to all processes
console: Requesting system reboot
console: reboot: Restarting system
JOB TIME : 68.64 s
Signed-off-by: Philippe Mathieu-Daudé <address@hidden>
Signed-off-by: Niek Linnenbank <address@hidden>
Reviewed-by: Alex Bennée <address@hidden>
Tested-by: Alex Bennée <address@hidden>
Message-id: address@hidden
[NL: rename in commit message Raspbian to Armbian, remove vm.set_machine()]
[NL: extend test with ethernet device checks]
Signed-off-by: Peter Maydell <address@hidden>
---
tests/acceptance/boot_linux_console.py | 47 ++++++++++++++++++++++++++
1 file changed, 47 insertions(+)
diff --git a/tests/acceptance/boot_linux_console.py
b/tests/acceptance/boot_linux_console.py
index dabc8ef2afb..0762dbe83a5 100644
--- a/tests/acceptance/boot_linux_console.py
+++ b/tests/acceptance/boot_linux_console.py
@@ -572,6 +572,53 @@ class BootLinuxConsole(Test):
exec_command_and_wait_for_pattern(self, 'reboot',
'reboot: Restarting system')
+ def test_arm_orangepi_sd(self):
+ """
+ :avocado: tags=arch:arm
+ :avocado: tags=machine:orangepi-pc
+ """
+ deb_url = ('https://apt.armbian.com/pool/main/l/'
+ 'linux-4.20.7-sunxi/linux-image-dev-sunxi_5.75_armhf.deb')
+ deb_hash = '1334c29c44d984ffa05ed10de8c3361f33d78315'
+ deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash)
+ kernel_path = self.extract_from_deb(deb_path,
+ '/boot/vmlinuz-4.20.7-sunxi')
+ dtb_path = '/usr/lib/linux-image-dev-sunxi/sun8i-h3-orangepi-pc.dtb'
+ dtb_path = self.extract_from_deb(deb_path, dtb_path)
+ rootfs_url = ('http://storage.kernelci.org/images/rootfs/buildroot/'
+ 'kci-2019.02/armel/base/rootfs.ext2.xz')
+ rootfs_hash = '692510cb625efda31640d1de0a8d60e26040f061'
+ rootfs_path_xz = self.fetch_asset(rootfs_url, asset_hash=rootfs_hash)
+ rootfs_path = os.path.join(self.workdir, 'rootfs.cpio')
+ archive.lzma_uncompress(rootfs_path_xz, rootfs_path)
+
+ self.vm.set_console()
+ kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE +
+ 'console=ttyS0,115200 '
+ 'root=/dev/mmcblk0 rootwait rw '
+ 'panic=-1 noreboot')
+ self.vm.add_args('-kernel', kernel_path,
+ '-dtb', dtb_path,
+ '-drive', 'file=' + rootfs_path + ',if=sd,format=raw',
+ '-append', kernel_command_line,
+ '-no-reboot')
+ self.vm.launch()
+ shell_ready = "/bin/sh: can't access tty; job control turned off"
+ self.wait_for_console_pattern(shell_ready)
+
+ exec_command_and_wait_for_pattern(self, 'cat /proc/cpuinfo',
+ 'Allwinner sun8i Family')
+ exec_command_and_wait_for_pattern(self, 'cat /proc/partitions',
+ 'mmcblk0')
+ exec_command_and_wait_for_pattern(self, 'ifconfig eth0 up',
+ 'eth0: Link is Up')
+ exec_command_and_wait_for_pattern(self, 'udhcpc eth0',
+ 'udhcpc: lease of 10.0.2.15 obtained')
+ exec_command_and_wait_for_pattern(self, 'ping -c 3 10.0.2.2',
+ '3 packets transmitted, 3 packets received, 0% packet loss')
+ exec_command_and_wait_for_pattern(self, 'reboot',
+ 'reboot: Restarting system')
+
def test_s390x_s390_ccw_virtio(self):
"""
:avocado: tags=arch:s390x
--
2.20.1
- [PULL 16/36] hw/arm/allwinner-h3: add System Control module, (continued)
- [PULL 16/36] hw/arm/allwinner-h3: add System Control module, Peter Maydell, 2020/03/12
- [PULL 14/36] hw/arm/allwinner-h3: add Clock Control Unit, Peter Maydell, 2020/03/12
- [PULL 17/36] hw/arm/allwinner: add CPU Configuration module, Peter Maydell, 2020/03/12
- [PULL 18/36] hw/arm/allwinner: add Security Identifier device, Peter Maydell, 2020/03/12
- [PULL 21/36] hw/arm/allwinner-h3: add Boot ROM support, Peter Maydell, 2020/03/12
- [PULL 24/36] tests/boot_linux_console: Add a quick test for the OrangePi PC board, Peter Maydell, 2020/03/12
- [PULL 25/36] tests/boot_linux_console: Add initrd test for the Orange Pi PC board, Peter Maydell, 2020/03/12
- [PULL 26/36] tests/boot_linux_console: Add a SD card test for the OrangePi PC board,
Peter Maydell <=
- [PULL 20/36] hw/arm/allwinner-h3: add EMAC ethernet device, Peter Maydell, 2020/03/12
- [PULL 23/36] hw/arm/allwinner: add RTC device support, Peter Maydell, 2020/03/12
- [PULL 28/36] tests/boot_linux_console: Test booting NetBSD via U-Boot on OrangePi PC, Peter Maydell, 2020/03/12
- [PULL 31/36] hw/arm/virt: Introduce VirtGICType enum type, Peter Maydell, 2020/03/12
- [PULL 22/36] hw/arm/allwinner-h3: add SDRAM controller device, Peter Maydell, 2020/03/12
[PULL 19/36] hw/arm/allwinner: add SD/MMC host controller, Peter Maydell, 2020/03/12
[PULL 27/36] tests/boot_linux_console: Add a SLOW test booting Ubuntu on OrangePi PC, Peter Maydell, 2020/03/12