[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v2] hw/misc/pca9552: Trace LED On/Off events
From: |
Philippe Mathieu-Daudé |
Subject: |
Re: [PATCH v2] hw/misc/pca9552: Trace LED On/Off events |
Date: |
Wed, 17 Jun 2020 09:52:08 +0200 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Thunderbird/68.5.0 |
On 6/17/20 9:39 AM, Cédric Le Goater wrote:
> On 6/17/20 8:47 AM, Philippe Mathieu-Daudé wrote:
>> Example booting obmc-phosphor-image:
>>
>> $ qemu-system-arm -M witherspoon-bmc -trace pca\*
>> 26033@1592376001.873828:pca9552_led_state 0x5594a9f57560 LEDs [........
>> ........]
>> 26033@1592376001.874169:pca9552_led_state 0x5594a9f57560 LEDs [........
>> ........]
>> 26033@1592376001.874348:pca9552_led_state 0x5594a9f57560 LEDs [........
>> ........]
>> 26033@1592376001.874514:pca9552_led_state 0x5594a9f57560 LEDs [........
>> ........]
>> 26033@1592376001.879601:pca9552_led_state 0x5594a9f57560 LEDs [........
>> .......*]
>> 26033@1592376001.880507:pca9552_led_state 0x5594a9f57560 LEDs [........
>> ......**]
>> 26033@1592376001.880885:pca9552_led_state 0x5594a9f57560 LEDs [........
>> .....***]
>> 26033@1592376001.881228:pca9552_led_state 0x5594a9f57560 LEDs [........
>> ....****]
>> 26033@1592376001.881601:pca9552_led_state 0x5594a9f57560 LEDs [..*.....
>> ....****]
>> 26033@1592376001.881952:pca9552_led_state 0x5594a9f57560 LEDs [.**.....
>> ....****]
>> 26033@1592376001.882299:pca9552_led_state 0x5594a9f57560 LEDs [***.....
>> ....****]
>> 26033@1592376065.090910:pca9552_led_state 0x5594a9f57560 LEDs [*.*.....
>> ....****]
>> 26033@1592376065.600649:pca9552_led_state 0x5594a9f57560 LEDs [***.....
>> ....****]
>> 26033@1592376066.110565:pca9552_led_state 0x5594a9f57560 LEDs [*.*.....
>> ....****]
>> 26033@1592376066.620390:pca9552_led_state 0x5594a9f57560 LEDs [***.....
>> ....****]
>
> It looks better but the ordering is wrong.
The order is [15, 14, ..., 3, 2, 1, 0].
This one is blinking?
front-power {
retain-state-shutdown;
default-state = "keep";
gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
};
>
>> Suggested-by: Cédric Le Goater <clg@kaod.org>
>> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
>> ---
>> hw/misc/pca9552.c | 18 ++++++++++++++++++
>> hw/misc/trace-events | 3 +++
>> 2 files changed, 21 insertions(+)
>>
>> diff --git a/hw/misc/pca9552.c b/hw/misc/pca9552.c
>> index cac729e35a..693f6c3b24 100644
>> --- a/hw/misc/pca9552.c
>> +++ b/hw/misc/pca9552.c
>> @@ -17,6 +17,7 @@
>> #include "migration/vmstate.h"
>> #include "qapi/error.h"
>> #include "qapi/visitor.h"
>> +#include "trace.h"
>>
>> #define PCA9552_LED_ON 0x0
>> #define PCA9552_LED_OFF 0x1
>> @@ -95,6 +96,23 @@ static void pca9552_write(PCA9552State *s, uint8_t reg,
>> uint8_t data)
>> case PCA9552_LS3:
>> s->regs[reg] = data;
>> pca9552_update_pin_input(s);
>> + if (trace_event_get_state_backends(TRACE_PCA9552_LED_STATE)) {
>> + char buf[2][9];
>> +
>> + for (int i = 0; i < 2; i++) {
>> + uint8_t val = s->regs[PCA9552_INPUT0 + i];
>> + sprintf(buf[i], "%c%c%c%c%c%c%c%c",
>> + val & 0x80 ? '*' : '.',
>> + val & 0x40 ? '*' : '.',
>> + val & 0x20 ? '*' : '.',
>> + val & 0x10 ? '*' : '.',
>> + val & 0x08 ? '*' : '.',
>> + val & 0x04 ? '*' : '.',
>> + val & 0x02 ? '*' : '.',
>> + val & 0x01 ? '*' : '.');
>> + }
>> + trace_pca9552_led_state(s, buf[1], buf[0]);
>> + }
>> break;
>
> or something like this :
>
> static void pca9552_update_pin_input(PCA9552State *s)
> {
> int i;
> + char state[s->nr_leds + 1];
>
> for (i = 0; i < s->nr_leds; i++) {
> uint8_t input_reg = PCA9552_INPUT0 + (i / 8);
> @@ -45,9 +47,11 @@ static void pca9552_update_pin_input(PCA
> switch (config) {
> case PCA9552_LED_ON:
> s->regs[input_reg] |= 1 << input_shift;
> + state[i] = '*';
> break;
> case PCA9552_LED_OFF:
> s->regs[input_reg] &= ~(1 << input_shift);
> + state[i] = '.';
> break;
> case PCA9552_LED_PWM0:
> case PCA9552_LED_PWM1:
> @@ -56,6 +60,9 @@ static void pca9552_update_pin_input(PCA
> break;
> }
> }
> + state[i] = 0;
> +
> + trace_pca9552_led_state(s, state);
> }
>
>
>
> The pin usage is described in the witherspoon DTS :
>
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts?id=b1f9be9392f0#n78
>
> The front-power led is blinking. I suppose it means the BMC is on but not the
> host.
>
>
> Cheers,
>
> C.
>
>>
>> case PCA9552_INPUT0:
>> diff --git a/hw/misc/trace-events b/hw/misc/trace-events
>> index 5561746866..21e52f192d 100644
>> --- a/hw/misc/trace-events
>> +++ b/hw/misc/trace-events
>> @@ -206,3 +206,6 @@ via1_rtc_cmd_pram_sect_write(int sector, int offset, int
>> addr, int value) "secto
>> # grlib_ahb_apb_pnp.c
>> grlib_ahb_pnp_read(uint64_t addr, uint32_t value) "AHB PnP read
>> addr:0x%03"PRIx64" data:0x%08x"
>> grlib_apb_pnp_read(uint64_t addr, uint32_t value) "APB PnP read
>> addr:0x%03"PRIx64" data:0x%08x"
>> +
>> +# pca9552.c
>> +pca9552_led_state(void *object, const char *bufhi, const char *buflo) "%p
>> LEDs [%s %s]"
>>
>
>