[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v2] hw/misc/pca9552: Trace LED On/Off events
From: |
Cédric Le Goater |
Subject: |
Re: [PATCH v2] hw/misc/pca9552: Trace LED On/Off events |
Date: |
Wed, 17 Jun 2020 10:01:18 +0200 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Thunderbird/68.8.0 |
On 6/17/20 9:52 AM, Philippe Mathieu-Daudé wrote:
> On 6/17/20 9:39 AM, Cédric Le Goater wrote:
>> On 6/17/20 8:47 AM, Philippe Mathieu-Daudé wrote:
>>> Example booting obmc-phosphor-image:
>>>
>>> $ qemu-system-arm -M witherspoon-bmc -trace pca\*
>>> 26033@1592376001.873828:pca9552_led_state 0x5594a9f57560 LEDs [........
>>> ........]
>>> 26033@1592376001.874169:pca9552_led_state 0x5594a9f57560 LEDs [........
>>> ........]
>>> 26033@1592376001.874348:pca9552_led_state 0x5594a9f57560 LEDs [........
>>> ........]
>>> 26033@1592376001.874514:pca9552_led_state 0x5594a9f57560 LEDs [........
>>> ........]
>>> 26033@1592376001.879601:pca9552_led_state 0x5594a9f57560 LEDs [........
>>> .......*]
>>> 26033@1592376001.880507:pca9552_led_state 0x5594a9f57560 LEDs [........
>>> ......**]
>>> 26033@1592376001.880885:pca9552_led_state 0x5594a9f57560 LEDs [........
>>> .....***]
>>> 26033@1592376001.881228:pca9552_led_state 0x5594a9f57560 LEDs [........
>>> ....****]
>>> 26033@1592376001.881601:pca9552_led_state 0x5594a9f57560 LEDs [..*.....
>>> ....****]
>>> 26033@1592376001.881952:pca9552_led_state 0x5594a9f57560 LEDs [.**.....
>>> ....****]
>>> 26033@1592376001.882299:pca9552_led_state 0x5594a9f57560 LEDs [***.....
>>> ....****]
>>> 26033@1592376065.090910:pca9552_led_state 0x5594a9f57560 LEDs [*.*.....
>>> ....****]
>>> 26033@1592376065.600649:pca9552_led_state 0x5594a9f57560 LEDs [***.....
>>> ....****]
>>> 26033@1592376066.110565:pca9552_led_state 0x5594a9f57560 LEDs [*.*.....
>>> ....****]
>>> 26033@1592376066.620390:pca9552_led_state 0x5594a9f57560 LEDs [***.....
>>> ....****]
>>
>> It looks better but the ordering is wrong.
>
> The order is [15, 14, ..., 3, 2, 1, 0].
I am contaminated by PowerPC specs.
> This one is blinking?
>
> front-power {
> retain-state-shutdown;
> default-state = "keep";
> gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
> };
yes.
Let it be then,
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Thanks,
C.
>>
>>> Suggested-by: Cédric Le Goater <clg@kaod.org>
>>> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
>>> ---
>>> hw/misc/pca9552.c | 18 ++++++++++++++++++
>>> hw/misc/trace-events | 3 +++
>>> 2 files changed, 21 insertions(+)
>>>
>>> diff --git a/hw/misc/pca9552.c b/hw/misc/pca9552.c
>>> index cac729e35a..693f6c3b24 100644
>>> --- a/hw/misc/pca9552.c
>>> +++ b/hw/misc/pca9552.c
>>> @@ -17,6 +17,7 @@
>>> #include "migration/vmstate.h"
>>> #include "qapi/error.h"
>>> #include "qapi/visitor.h"
>>> +#include "trace.h"
>>>
>>> #define PCA9552_LED_ON 0x0
>>> #define PCA9552_LED_OFF 0x1
>>> @@ -95,6 +96,23 @@ static void pca9552_write(PCA9552State *s, uint8_t reg,
>>> uint8_t data)
>>> case PCA9552_LS3:
>>> s->regs[reg] = data;
>>> pca9552_update_pin_input(s);
>>> + if (trace_event_get_state_backends(TRACE_PCA9552_LED_STATE)) {
>>> + char buf[2][9];
>>> +
>>> + for (int i = 0; i < 2; i++) {
>>> + uint8_t val = s->regs[PCA9552_INPUT0 + i];
>>> + sprintf(buf[i], "%c%c%c%c%c%c%c%c",
>>> + val & 0x80 ? '*' : '.',
>>> + val & 0x40 ? '*' : '.',
>>> + val & 0x20 ? '*' : '.',
>>> + val & 0x10 ? '*' : '.',
>>> + val & 0x08 ? '*' : '.',
>>> + val & 0x04 ? '*' : '.',
>>> + val & 0x02 ? '*' : '.',
>>> + val & 0x01 ? '*' : '.');
>>> + }
>>> + trace_pca9552_led_state(s, buf[1], buf[0]);
>>> + }
>>> break;
>>
>> or something like this :
>>
>> static void pca9552_update_pin_input(PCA9552State *s)
>> {
>> int i;
>> + char state[s->nr_leds + 1];
>>
>> for (i = 0; i < s->nr_leds; i++) {
>> uint8_t input_reg = PCA9552_INPUT0 + (i / 8);
>> @@ -45,9 +47,11 @@ static void pca9552_update_pin_input(PCA
>> switch (config) {
>> case PCA9552_LED_ON:
>> s->regs[input_reg] |= 1 << input_shift;
>> + state[i] = '*';
>> break;
>> case PCA9552_LED_OFF:
>> s->regs[input_reg] &= ~(1 << input_shift);
>> + state[i] = '.';
>> break;
>> case PCA9552_LED_PWM0:
>> case PCA9552_LED_PWM1:
>> @@ -56,6 +60,9 @@ static void pca9552_update_pin_input(PCA
>> break;
>> }
>> }
>> + state[i] = 0;
>> +
>> + trace_pca9552_led_state(s, state);
>> }
>>
>>
>>
>> The pin usage is described in the witherspoon DTS :
>>
>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts?id=b1f9be9392f0#n78
>>
>> The front-power led is blinking. I suppose it means the BMC is on but not
>> the host.
>>
>>
>> Cheers,
>>
>> C.
>>
>>>
>>> case PCA9552_INPUT0:
>>> diff --git a/hw/misc/trace-events b/hw/misc/trace-events
>>> index 5561746866..21e52f192d 100644
>>> --- a/hw/misc/trace-events
>>> +++ b/hw/misc/trace-events
>>> @@ -206,3 +206,6 @@ via1_rtc_cmd_pram_sect_write(int sector, int offset,
>>> int addr, int value) "secto
>>> # grlib_ahb_apb_pnp.c
>>> grlib_ahb_pnp_read(uint64_t addr, uint32_t value) "AHB PnP read
>>> addr:0x%03"PRIx64" data:0x%08x"
>>> grlib_apb_pnp_read(uint64_t addr, uint32_t value) "APB PnP read
>>> addr:0x%03"PRIx64" data:0x%08x"
>>> +
>>> +# pca9552.c
>>> +pca9552_led_state(void *object, const char *bufhi, const char *buflo) "%p
>>> LEDs [%s %s]"
>>>
>>
>>