Re: [PATCH v2 4/9] acpi: set fadt.smi_cmd to zero when SMM is not supported

[Igor Mammedov]

On Mon,  8 Feb 2021 13:57:23 -0800
isaku.yamahata@gmail.com wrote:

> From: Isaku Yamahata <isaku.yamahata@intel.com>
> 
> From table 5.9 SMI_CMD of ACPI spec
> > This field is reserved and must be zero on system
> > that does not support System Management mode.  
> 
> When smm is not enabled, set it to zero to comform to the spec.
> When -machine smm=off is passed, the change to FACP is as follows.
> 
> @@ -1,46 +1,46 @@
>  /*
>   * Intel ACPI Component Architecture
>   * AML/ASL+ Disassembler version 20180105 (64-bit version)
>   * Copyright (c) 2000 - 2018 Intel Corporation
>   *
> - * Disassembly of tests/data/acpi/q35/FACP, Fri Feb  5 16:57:04 2021
> + * Disassembly of /tmp/aml-1OQYX0, Fri Feb  5 16:57:04 2021
>   *
>   * ACPI Data Table [FACP]
>   *
>   * Format: [HexOffset DecimalOffset ByteLength]  FieldName : FieldValue
>   */
> 
>  [000h 0000   4]                    Signature : "FACP"    [Fixed ACPI 
> Description Table (FADT)]
>  [004h 0004   4]                 Table Length : 000000F4
>  [008h 0008   1]                     Revision : 03
> -[009h 0009   1]                     Checksum : 1F
> +[009h 0009   1]                     Checksum : D6
>  [00Ah 0010   6]                       Oem ID : "BOCHS "
>  [010h 0016   8]                 Oem Table ID : "BXPCFACP"
>  [018h 0024   4]                 Oem Revision : 00000001
>  [01Ch 0028   4]              Asl Compiler ID : "BXPC"
>  [020h 0032   4]        Asl Compiler Revision : 00000001
> 
>  [024h 0036   4]                 FACS Address : 00000000
>  [028h 0040   4]                 DSDT Address : 00000000
>  [02Ch 0044   1]                        Model : 01
>  [02Dh 0045   1]                   PM Profile : 00 [Unspecified]
>  [02Eh 0046   2]                SCI Interrupt : 0009
> -[030h 0048   4]             SMI Command Port : 000000B2
> -[034h 0052   1]            ACPI Enable Value : 02
> -[035h 0053   1]           ACPI Disable Value : 03
> +[030h 0048   4]             SMI Command Port : 00000000
> +[034h 0052   1]            ACPI Enable Value : 00
> +[035h 0053   1]           ACPI Disable Value : 00
>  [036h 0054   1]               S4BIOS Command : 00
>  [037h 0055   1]              P-State Control : 00
>  [038h 0056   4]     PM1A Event Block Address : 00000600
>  [03Ch 0060   4]     PM1B Event Block Address : 00000000
>  [040h 0064   4]   PM1A Control Block Address : 00000604
>  [044h 0068   4]   PM1B Control Block Address : 00000000
>  [048h 0072   4]    PM2 Control Block Address : 00000000
>  [04Ch 0076   4]       PM Timer Block Address : 00000608
>  [050h 0080   4]           GPE0 Block Address : 00000620
>  [054h 0084   4]           GPE1 Block Address : 00000000
>  [058h 0088   1]       PM1 Event Block Length : 04
>  [059h 0089   1]     PM1 Control Block Length : 02
>  [05Ah 0090   1]     PM2 Control Block Length : 00
>  [05Bh 0091   1]        PM Timer Block Length : 04
>  [05Ch 0092   1]            GPE0 Block Length : 10
>  [05Dh 0093   1]            GPE1 Block Length : 00
> 
> Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>

when migrated to old QEMU, and VM after that is reset it
regenerate ACPI tables for old QEMU, so guest should be
able to turn on ACPI.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>

> ---
>  hw/i386/acpi-build.c | 12 +++++++++---
>  1 file changed, 9 insertions(+), 3 deletions(-)
> 
> diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
> index f56d699c7f..c2f11d95d8 100644
> --- a/hw/i386/acpi-build.c
> +++ b/hw/i386/acpi-build.c
> @@ -139,6 +139,8 @@ const struct AcpiGenericAddress x86_nvdimm_acpi_dsmio = {
>  static void init_common_fadt_data(MachineState *ms, Object *o,
>                                    AcpiFadtData *data)
>  {
> +    X86MachineState *x86ms = X86_MACHINE(ms);
> +    bool smm_enabled = x86_machine_is_smm_enabled(x86ms);
>      uint32_t io = object_property_get_uint(o, ACPI_PM_PROP_PM_IO_BASE, NULL);
>      AmlAddressSpace as = AML_AS_SYSTEM_IO;
>      AcpiFadtData fadt = {
> @@ -159,12 +161,16 @@ static void init_common_fadt_data(MachineState *ms, 
> Object *o,
>          .rtc_century = RTC_CENTURY,
>          .plvl2_lat = 0xfff /* C2 state not supported */,
>          .plvl3_lat = 0xfff /* C3 state not supported */,
> -        .smi_cmd = ACPI_PORT_SMI_CMD,
> +        .smi_cmd = smm_enabled ? ACPI_PORT_SMI_CMD : 0,
>          .sci_int = object_property_get_uint(o, ACPI_PM_PROP_SCI_INT, NULL),
>          .acpi_enable_cmd =
> -            object_property_get_uint(o, ACPI_PM_PROP_ACPI_ENABLE_CMD, NULL),
> +            smm_enabled ?
> +            object_property_get_uint(o, ACPI_PM_PROP_ACPI_ENABLE_CMD, NULL) :
> +            0,
>          .acpi_disable_cmd =
> -            object_property_get_uint(o, ACPI_PM_PROP_ACPI_DISABLE_CMD, NULL),
> +            smm_enabled ?
> +            object_property_get_uint(o, ACPI_PM_PROP_ACPI_DISABLE_CMD, NULL) 
> :
> +            0,
>          .pm1a_evt = { .space_id = as, .bit_width = 4 * 8, .address = io },
>          .pm1a_cnt = { .space_id = as, .bit_width = 2 * 8,
>                        .address = io + 0x04 },