qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH 2/3] hw: aspeed_gpio: Split GPIOSet handling from accessors


From: Andrew Jeffery
Subject: [PATCH 2/3] hw: aspeed_gpio: Split GPIOSet handling from accessors
Date: Tue, 8 Feb 2022 01:34:08 +1030

Pave the way for implementing the new register interface for GPIO
control provided by the AST2600. We need a consistent data model, so
do some work to enable use of the AspeedGPIOReg / GPIOSets data
structures for both.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
 hw/gpio/aspeed_gpio.c | 105 ++++++++++++++++++++++++------------------
 1 file changed, 60 insertions(+), 45 deletions(-)

diff --git a/hw/gpio/aspeed_gpio.c b/hw/gpio/aspeed_gpio.c
index c63634d3d3e2..1d4d1aedc4b5 100644
--- a/hw/gpio/aspeed_gpio.c
+++ b/hw/gpio/aspeed_gpio.c
@@ -516,28 +516,11 @@ static const AspeedGPIOReg 
aspeed_1_8v_gpios[GPIO_1_8V_REG_ARRAY_SIZE] = {
     [GPIO_1_8V_E_INPUT_MASK] =     {1, gpio_reg_input_mask},
 };
 
-static uint64_t aspeed_gpio_read(void *opaque, hwaddr offset, uint32_t size)
+static uint64_t
+aspeed_gpio_set_read(const AspeedGPIOState *s, const AspeedGPIOReg *reg)
 {
-    AspeedGPIOState *s = ASPEED_GPIO(opaque);
-    AspeedGPIOClass *agc = ASPEED_GPIO_GET_CLASS(s);
-    uint64_t idx = -1;
-    const AspeedGPIOReg *reg;
-    GPIOSets *set;
+    const GPIOSets *set = &s->sets[reg->set_idx];
 
-    idx = offset >> 2;
-    if (idx >= GPIO_DEBOUNCE_TIME_1 && idx <= GPIO_DEBOUNCE_TIME_3) {
-        idx -= GPIO_DEBOUNCE_TIME_1;
-        return (uint64_t) s->debounce_regs[idx];
-    }
-
-    reg = &agc->reg_table[idx];
-    if (reg->set_idx >= agc->nr_gpio_sets) {
-        qemu_log_mask(LOG_GUEST_ERROR, "%s: no getter for offset 0x%"
-                      HWADDR_PRIx"\n", __func__, offset);
-        return 0;
-    }
-
-    set = &s->sets[reg->set_idx];
     switch (reg->type) {
     case gpio_reg_data_value:
         return set->data_value;
@@ -567,37 +550,44 @@ static uint64_t aspeed_gpio_read(void *opaque, hwaddr 
offset, uint32_t size)
         return set->data_read;
     case gpio_reg_input_mask:
         return set->input_mask;
-    default:
+    case gpio_not_a_reg:
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid register: %d\n", __func__,
+                      reg->type);
+    }
+
+    return 0;
+}
+
+static uint64_t aspeed_gpio_read(void *opaque, hwaddr offset, uint32_t size)
+{
+    AspeedGPIOState *s = ASPEED_GPIO(opaque);
+    AspeedGPIOClass *agc = ASPEED_GPIO_GET_CLASS(s);
+    const AspeedGPIOReg *reg;
+    uint64_t idx = -1;
+
+    idx = offset >> 2;
+    if (idx >= GPIO_DEBOUNCE_TIME_1 && idx <= GPIO_DEBOUNCE_TIME_3) {
+        idx -= GPIO_DEBOUNCE_TIME_1;
+        return (uint64_t) s->debounce_regs[idx];
+    }
+
+    reg = &agc->reg_table[idx];
+    if (reg->set_idx >= agc->nr_gpio_sets) {
         qemu_log_mask(LOG_GUEST_ERROR, "%s: no getter for offset 0x%"
                       HWADDR_PRIx"\n", __func__, offset);
         return 0;
     }
+
+    return aspeed_gpio_set_read(s, reg);
 }
 
-static void aspeed_gpio_write(void *opaque, hwaddr offset, uint64_t data,
-                              uint32_t size)
+static void aspeed_gpio_set_write(AspeedGPIOState *s, const AspeedGPIOReg *reg,
+                                  uint32_t data)
 {
-    AspeedGPIOState *s = ASPEED_GPIO(opaque);
     AspeedGPIOClass *agc = ASPEED_GPIO_GET_CLASS(s);
     const GPIOSetProperties *props;
-    uint64_t idx = -1;
-    const AspeedGPIOReg *reg;
-    GPIOSets *set;
     uint32_t cleared;
-
-    idx = offset >> 2;
-    if (idx >= GPIO_DEBOUNCE_TIME_1 && idx <= GPIO_DEBOUNCE_TIME_3) {
-        idx -= GPIO_DEBOUNCE_TIME_1;
-        s->debounce_regs[idx] = (uint32_t) data;
-        return;
-    }
-
-    reg = &agc->reg_table[idx];
-    if (reg->set_idx >= agc->nr_gpio_sets) {
-        qemu_log_mask(LOG_GUEST_ERROR, "%s: no setter for offset 0x%"
-                      HWADDR_PRIx"\n", __func__, offset);
-        return;
-    }
+    GPIOSets *set;
 
     set = &s->sets[reg->set_idx];
     props = &agc->props[reg->set_idx];
@@ -678,13 +668,38 @@ static void aspeed_gpio_write(void *opaque, hwaddr 
offset, uint64_t data,
          */
          set->input_mask = data & props->input;
         break;
-    default:
-        qemu_log_mask(LOG_GUEST_ERROR, "%s: no setter for offset 0x%"
-                      HWADDR_PRIx"\n", __func__, offset);
+    case gpio_not_a_reg:
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid register: %d\n", __func__,
+                      reg->type);
         return;
     }
+
     aspeed_gpio_update(s, set, set->data_value);
-    return;
+}
+
+static void aspeed_gpio_write(void *opaque, hwaddr offset, uint64_t data,
+                              uint32_t size)
+{
+    AspeedGPIOState *s = ASPEED_GPIO(opaque);
+    AspeedGPIOClass *agc = ASPEED_GPIO_GET_CLASS(s);
+    const AspeedGPIOReg *reg;
+    uint64_t idx = -1;
+
+    idx = offset >> 2;
+    if (idx >= GPIO_DEBOUNCE_TIME_1 && idx <= GPIO_DEBOUNCE_TIME_3) {
+        idx -= GPIO_DEBOUNCE_TIME_1;
+        s->debounce_regs[idx] = (uint32_t) data;
+        return;
+    }
+
+    reg = &agc->reg_table[idx];
+    if (reg->set_idx >= agc->nr_gpio_sets) {
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: no setter for offset 0x%"
+                      HWADDR_PRIx"\n", __func__, offset);
+        return;
+    }
+
+    aspeed_gpio_set_write(s, reg, data);
 }
 
 static int get_set_idx(AspeedGPIOState *s, const char *group, int *group_idx)
-- 
2.32.0




reply via email to

[Prev in Thread] Current Thread [Next in Thread]