[PATCH v13 4/4] target/ppc: trigger PERFM EBBs from power8-pmu.c

[Daniel Henrique Barboza]

This patch adds the EBB exception support that are triggered by
Performance Monitor alerts. This happens when a Performance Monitor
alert occurs and MMCR0_EBE, BESCR_PME and BESCR_GE are set.

fire_PMC_interrupt() will execute a new ebb_perfm_excp() helper that
will check for MMCR0_EBE, BESCR_PME and BESCR_GE bits. If all bits are
set, do_ebb() will attempt to trigger a PERFM EBB event.

If the EBB facility is enabled in both FSCR and HFSCR we consider that
the EBB is valid and set BESCR_PMEO. After that, if we're running in
problem state, fire a POWERPC_EXCP_PERM_EBB immediately. Otherwise we'll
queue a PPC_INTERRUPT_EBB.

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
---
 target/ppc/excp_helper.c | 48 ++++++++++++++++++++++++++++++++++++++++
 target/ppc/helper.h      |  1 +
 target/ppc/power8-pmu.c  |  3 +--
 3 files changed, 50 insertions(+), 2 deletions(-)

diff --git a/target/ppc/excp_helper.c b/target/ppc/excp_helper.c
index 5e7d29ae00..89b7b3ac00 100644
--- a/target/ppc/excp_helper.c
+++ b/target/ppc/excp_helper.c
@@ -2066,6 +2066,54 @@ void helper_rfebb(CPUPPCState *env, target_ulong s)
         env->spr[SPR_BESCR] &= ~BESCR_GE;
     }
 }
+
+/*
+ * Triggers or queues an 'ebb_excp' EBB exception. All checks
+ * but FSCR, HFSCR and msr_pr must be done beforehand.
+ *
+ * PowerISA v3.1 isn't clear about whether an EBB should be
+ * postponed or cancelled if the EBB facility is unavailable.
+ * Our assumption here is that the EBB is cancelled if both
+ * FSCR and HFSCR EBB facilities aren't available.
+ */
+static void do_ebb(CPUPPCState *env, int ebb_excp)
+{
+    PowerPCCPU *cpu = env_archcpu(env);
+    CPUState *cs = CPU(cpu);
+
+    /*
+     * FSCR_EBB and FSCR_IC_EBB are the same bits used with
+     * HFSCR.
+     */
+    helper_fscr_facility_check(env, FSCR_EBB, 0, FSCR_IC_EBB);
+    helper_hfscr_facility_check(env, FSCR_EBB, "EBB", FSCR_IC_EBB);
+
+    if (ebb_excp == POWERPC_EXCP_PERFM_EBB) {
+        env->spr[SPR_BESCR] |= BESCR_PMEO;
+    } else if (ebb_excp == POWERPC_EXCP_EXTERNAL_EBB) {
+        env->spr[SPR_BESCR] |= BESCR_EEO;
+    }
+
+    if (msr_pr == 1) {
+        powerpc_excp(cpu, ebb_excp);
+    } else {
+        env->pending_interrupts |= 1 << PPC_INTERRUPT_EBB;
+        cpu_interrupt(cs, CPU_INTERRUPT_HARD);
+    }
+}
+
+void helper_ebb_perfm_excp(CPUPPCState *env)
+{
+    bool perfm_ebb_enabled = env->spr[SPR_POWER_MMCR0] & MMCR0_EBE &&
+                             env->spr[SPR_BESCR] & BESCR_PME &&
+                             env->spr[SPR_BESCR] & BESCR_GE;
+
+    if (!perfm_ebb_enabled) {
+        return;
+    }
+
+    do_ebb(env, POWERPC_EXCP_PERFM_EBB);
+}
 #endif
 
 /*****************************************************************************/
diff --git a/target/ppc/helper.h b/target/ppc/helper.h
index ab008c9d4e..8c2c03fd48 100644
--- a/target/ppc/helper.h
+++ b/target/ppc/helper.h
@@ -18,6 +18,7 @@ DEF_HELPER_1(rfid, void, env)
 DEF_HELPER_1(rfscv, void, env)
 DEF_HELPER_1(hrfid, void, env)
 DEF_HELPER_2(rfebb, void, env, tl)
+DEF_HELPER_1(ebb_perfm_excp, void, env)
 DEF_HELPER_2(store_lpcr, void, env, tl)
 DEF_HELPER_2(store_pcr, void, env, tl)
 DEF_HELPER_2(store_mmcr0, void, env, tl)
diff --git a/target/ppc/power8-pmu.c b/target/ppc/power8-pmu.c
index d245663158..38e1ecb782 100644
--- a/target/ppc/power8-pmu.c
+++ b/target/ppc/power8-pmu.c
@@ -307,8 +307,7 @@ static void fire_PMC_interrupt(PowerPCCPU *cpu)
         env->spr[SPR_POWER_MMCR0] |= MMCR0_PMAO;
     }
 
-    /* PMC interrupt not implemented yet */
-    return;
+    helper_ebb_perfm_excp(env);
 }
 
 /* This helper assumes that the PMC is running. */
-- 
2.35.1