[PULL v2 31/31] hw/riscv: boot: Support 64bit fdt address.

[Alistair Francis]

From: Dylan Jhong <dylan@andestech.com>

The current riscv_load_fdt() forces fdt_load_addr to be placed at a dram 
address within 3GB,
but not all platforms have dram_base within 3GB.

This patch adds an exception for dram base not within 3GB,
which will place fdt at dram_end align 16MB.

riscv_setup_rom_reset_vec() also needs to be modified

Signed-off-by: Dylan Jhong <dylan@andestech.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220419115945.37945-1-dylan@andestech.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
 include/hw/riscv/boot.h |  4 ++--
 hw/riscv/boot.c         | 12 +++++++-----
 2 files changed, 9 insertions(+), 7 deletions(-)

diff --git a/include/hw/riscv/boot.h b/include/hw/riscv/boot.h
index d937c5c224..d2db29721a 100644
--- a/include/hw/riscv/boot.h
+++ b/include/hw/riscv/boot.h
@@ -46,12 +46,12 @@ target_ulong riscv_load_kernel(const char *kernel_filename,
                                symbol_fn_t sym_cb);
 hwaddr riscv_load_initrd(const char *filename, uint64_t mem_size,
                          uint64_t kernel_entry, hwaddr *start);
-uint32_t riscv_load_fdt(hwaddr dram_start, uint64_t dram_size, void *fdt);
+uint64_t riscv_load_fdt(hwaddr dram_start, uint64_t dram_size, void *fdt);
 void riscv_setup_rom_reset_vec(MachineState *machine, RISCVHartArrayState 
*harts,
                                hwaddr saddr,
                                hwaddr rom_base, hwaddr rom_size,
                                uint64_t kernel_entry,
-                               uint32_t fdt_load_addr, void *fdt);
+                               uint64_t fdt_load_addr, void *fdt);
 void riscv_rom_copy_firmware_info(MachineState *machine, hwaddr rom_base,
                                   hwaddr rom_size,
                                   uint32_t reset_vec_size,
diff --git a/hw/riscv/boot.c b/hw/riscv/boot.c
index 0f179d3601..57a41df8e9 100644
--- a/hw/riscv/boot.c
+++ b/hw/riscv/boot.c
@@ -212,9 +212,9 @@ hwaddr riscv_load_initrd(const char *filename, uint64_t 
mem_size,
     return *start + size;
 }
 
-uint32_t riscv_load_fdt(hwaddr dram_base, uint64_t mem_size, void *fdt)
+uint64_t riscv_load_fdt(hwaddr dram_base, uint64_t mem_size, void *fdt)
 {
-    uint32_t temp, fdt_addr;
+    uint64_t temp, fdt_addr;
     hwaddr dram_end = dram_base + mem_size;
     int ret, fdtsize = fdt_totalsize(fdt);
 
@@ -229,7 +229,7 @@ uint32_t riscv_load_fdt(hwaddr dram_base, uint64_t 
mem_size, void *fdt)
      * Thus, put it at an 16MB aligned address that less than fdt size from the
      * end of dram or 3GB whichever is lesser.
      */
-    temp = MIN(dram_end, 3072 * MiB);
+    temp = (dram_base < 3072 * MiB) ? MIN(dram_end, 3072 * MiB) : dram_end;
     fdt_addr = QEMU_ALIGN_DOWN(temp - fdtsize, 16 * MiB);
 
     ret = fdt_pack(fdt);
@@ -285,13 +285,15 @@ void riscv_setup_rom_reset_vec(MachineState *machine, 
RISCVHartArrayState *harts
                                hwaddr start_addr,
                                hwaddr rom_base, hwaddr rom_size,
                                uint64_t kernel_entry,
-                               uint32_t fdt_load_addr, void *fdt)
+                               uint64_t fdt_load_addr, void *fdt)
 {
     int i;
     uint32_t start_addr_hi32 = 0x00000000;
+    uint32_t fdt_load_addr_hi32 = 0x00000000;
 
     if (!riscv_is_32bit(harts)) {
         start_addr_hi32 = start_addr >> 32;
+        fdt_load_addr_hi32 = fdt_load_addr >> 32;
     }
     /* reset vector */
     uint32_t reset_vec[10] = {
@@ -304,7 +306,7 @@ void riscv_setup_rom_reset_vec(MachineState *machine, 
RISCVHartArrayState *harts
         start_addr,                  /* start: .dword */
         start_addr_hi32,
         fdt_load_addr,               /* fdt_laddr: .dword */
-        0x00000000,
+        fdt_load_addr_hi32,
                                      /* fw_dyn: */
     };
     if (riscv_is_32bit(harts)) {
-- 
2.35.1