[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
texinfo COPYING INSTALL.generic doc/fdl.texi bu...
|
From: |
Karl Berry |
|
Subject: |
texinfo COPYING INSTALL.generic doc/fdl.texi bu... |
|
Date: |
Fri, 06 Jul 2012 23:19:44 +0000 |
CVSROOT: /sources/texinfo
Module name: texinfo
Changes by: Karl Berry <karl> 12/07/06 23:19:44
Modified files:
. : COPYING INSTALL.generic
doc : fdl.texi
build-aux : compile config.guess config.sub depcomp
install-sh mdate-sh
Log message:
srclist update
CVSWeb URLs:
http://cvs.savannah.gnu.org/viewcvs/texinfo/COPYING?cvsroot=texinfo&r1=1.6&r2=1.7
http://cvs.savannah.gnu.org/viewcvs/texinfo/INSTALL.generic?cvsroot=texinfo&r1=1.9&r2=1.10
http://cvs.savannah.gnu.org/viewcvs/texinfo/doc/fdl.texi?cvsroot=texinfo&r1=1.11&r2=1.12
http://cvs.savannah.gnu.org/viewcvs/texinfo/build-aux/compile?cvsroot=texinfo&r1=1.2&r2=1.3
http://cvs.savannah.gnu.org/viewcvs/texinfo/build-aux/config.guess?cvsroot=texinfo&r1=1.5&r2=1.6
http://cvs.savannah.gnu.org/viewcvs/texinfo/build-aux/config.sub?cvsroot=texinfo&r1=1.4&r2=1.5
http://cvs.savannah.gnu.org/viewcvs/texinfo/build-aux/depcomp?cvsroot=texinfo&r1=1.4&r2=1.5
http://cvs.savannah.gnu.org/viewcvs/texinfo/build-aux/install-sh?cvsroot=texinfo&r1=1.4&r2=1.5
http://cvs.savannah.gnu.org/viewcvs/texinfo/build-aux/mdate-sh?cvsroot=texinfo&r1=1.4&r2=1.5
Patches:
Index: COPYING
===================================================================
RCS file: /sources/texinfo/texinfo/COPYING,v
retrieving revision 1.6
retrieving revision 1.7
diff -u -b -r1.6 -r1.7
Index: INSTALL.generic
===================================================================
RCS file: /sources/texinfo/texinfo/INSTALL.generic,v
retrieving revision 1.9
retrieving revision 1.10
diff -u -b -r1.9 -r1.10
--- INSTALL.generic 17 Oct 2011 00:06:51 -0000 1.9
+++ INSTALL.generic 6 Jul 2012 23:19:43 -0000 1.10
@@ -1,7 +1,7 @@
Installation Instructions
*************************
-Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation,
+Copyright (C) 1994-1996, 1999-2002, 2004-2012 Free Software Foundation,
Inc.
Copying and distribution of this file, with or without modification,
@@ -309,9 +309,10 @@
overridden in the site shell script).
Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-an Autoconf bug. Until the bug is fixed you can use this workaround:
+an Autoconf limitation. Until the limitation is lifted, you can use
+this workaround:
- CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+ CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash
`configure' Invocation
======================
@@ -367,4 +368,3 @@
`configure' also accepts some other, not widely useful, options. Run
`configure --help' for more details.
-
Index: doc/fdl.texi
===================================================================
RCS file: /sources/texinfo/texinfo/doc/fdl.texi,v
retrieving revision 1.11
retrieving revision 1.12
diff -u -b -r1.11 -r1.12
--- doc/fdl.texi 22 Oct 2011 23:12:19 -0000 1.11
+++ doc/fdl.texi 6 Jul 2012 23:19:43 -0000 1.12
@@ -503,4 +503,3 @@
@c Local Variables:
@c ispell-local-pdict: "ispell-dict"
@c End:
-
Index: build-aux/compile
===================================================================
RCS file: /sources/texinfo/texinfo/build-aux/compile,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -b -r1.2 -r1.3
--- build-aux/compile 17 Oct 2011 00:06:51 -0000 1.2
+++ build-aux/compile 6 Jul 2012 23:19:44 -0000 1.3
@@ -1,10 +1,9 @@
#! /bin/sh
-# Wrapper for compilers which do not understand `-c -o'.
+# Wrapper for compilers which do not understand '-c -o'.
-scriptversion=2010-11-15.09; # UTC
+scriptversion=2012-03-05.13; # UTC
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2009, 2010 Free Software
-# Foundation, Inc.
+# Copyright (C) 1999-2012 Free Software Foundation, Inc.
# Written by Tom Tromey <address@hidden>.
#
# This program is free software; you can redistribute it and/or modify
@@ -40,7 +39,7 @@
# func_file_conv build_file lazy
# Convert a $build file to $host form and store it in $file
-# Currently only supports Win32 hosts. If the determined conversion
+# Currently only supports Windows hosts. If the determined conversion
# type is listed in (the comma separated) LAZY, no conversion will
# take place.
func_file_conv ()
@@ -79,6 +78,48 @@
esac
}
+# func_cl_dashL linkdir
+# Make cl look for libraries in LINKDIR
+func_cl_dashL ()
+{
+ func_file_conv "$1"
+ if test -z "$lib_path"; then
+ lib_path=$file
+ else
+ lib_path="$lib_path;$file"
+ fi
+ linker_opts="$linker_opts -LIBPATH:$file"
+}
+
+# func_cl_dashl library
+# Do a library search-path lookup for cl
+func_cl_dashl ()
+{
+ lib=$1
+ found=no
+ save_IFS=$IFS
+ IFS=';'
+ for dir in $lib_path $LIB
+ do
+ IFS=$save_IFS
+ if $shared && test -f "$dir/$lib.dll.lib"; then
+ found=yes
+ lib=$dir/$lib.dll.lib
+ break
+ fi
+ if test -f "$dir/$lib.lib"; then
+ found=yes
+ lib=$dir/$lib.lib
+ break
+ fi
+ done
+ IFS=$save_IFS
+
+ if test "$found" != yes; then
+ lib=$lib.lib
+ fi
+}
+
# func_cl_wrapper cl arg...
# Adjust compile command to suit cl
func_cl_wrapper ()
@@ -94,7 +135,7 @@
else
case $1 in
-o)
- # configure might choose to run compile as `compile cc -o foo foo.c'.
+ # configure might choose to run compile as 'compile cc -o foo foo.c'.
eat=1
case $2 in
*.o | *.[oO][bB][jJ])
@@ -109,43 +150,34 @@
;;
esac
;;
+ -I)
+ eat=1
+ func_file_conv "$2" mingw
+ set x "$@" -I"$file"
+ shift
+ ;;
-I*)
func_file_conv "${1#-I}" mingw
set x "$@" -I"$file"
shift
;;
+ -l)
+ eat=1
+ func_cl_dashl "$2"
+ set x "$@" "$lib"
+ shift
+ ;;
-l*)
- lib=${1#-l}
- found=no
- save_IFS=$IFS
- IFS=';'
- for dir in $lib_path $LIB
- do
- IFS=$save_IFS
- if $shared && test -f "$dir/$lib.dll.lib"; then
- found=yes
- set x "$@" "$dir/$lib.dll.lib"
- break
- fi
- if test -f "$dir/$lib.lib"; then
- found=yes
- set x "$@" "$dir/$lib.lib"
- break
- fi
- done
- IFS=$save_IFS
-
- test "$found" != yes && set x "$@" "$lib.lib"
+ func_cl_dashl "${1#-l}"
+ set x "$@" "$lib"
shift
;;
+ -L)
+ eat=1
+ func_cl_dashL "$2"
+ ;;
-L*)
- func_file_conv "${1#-L}"
- if test -z "$lib_path"; then
- lib_path=$file
- else
- lib_path="$lib_path;$file"
- fi
- linker_opts="$linker_opts -LIBPATH:$file"
+ func_cl_dashL "${1#-L}"
;;
-static)
shared=false
@@ -196,19 +228,19 @@
case $1 in
'')
- echo "$0: No command. Try \`$0 --help' for more information." 1>&2
+ echo "$0: No command. Try '$0 --help' for more information." 1>&2
exit 1;
;;
-h | --h*)
cat <<\EOF
Usage: compile [--help] [--version] PROGRAM [ARGS]
-Wrapper for compilers which do not understand `-c -o'.
-Remove `-o dest.o' from ARGS, run PROGRAM with the remaining
+Wrapper for compilers which do not understand '-c -o'.
+Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
arguments, and rename the output as expected.
If you are trying to build a whole package this is not the
-right script to run: please start by reading the file `INSTALL'.
+right script to run: please start by reading the file 'INSTALL'.
Report bugs to <address@hidden>.
EOF
@@ -233,8 +265,8 @@
else
case $1 in
-o)
- # configure might choose to run compile as `compile cc -o foo foo.c'.
- # So we strip `-o arg' only if arg is an object.
+ # configure might choose to run compile as 'compile cc -o foo foo.c'.
+ # So we strip '-o arg' only if arg is an object.
eat=1
case $2 in
*.o | *.obj)
@@ -261,10 +293,10 @@
done
if test -z "$ofile" || test -z "$cfile"; then
- # If no `-o' option was seen then we might have been invoked from a
+ # If no '-o' option was seen then we might have been invoked from a
# pattern rule where we don't need one. That is ok -- this is a
# normal compilation that the losing compiler can handle. If no
- # `.c' file was seen then we are probably linking. That is also
+ # '.c' file was seen then we are probably linking. That is also
# ok.
exec "$@"
fi
@@ -273,7 +305,7 @@
cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
# Create the lock directory.
-# Note: use `[/\\:.-]' here to ensure that we don't use the same name
+# Note: use '[/\\:.-]' here to ensure that we don't use the same name
# that we are using for the .o file. Also, base the name on the expected
# object file name, since that is what matters with a parallel build.
lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
Index: build-aux/config.guess
===================================================================
RCS file: /sources/texinfo/texinfo/build-aux/config.guess,v
retrieving revision 1.5
retrieving revision 1.6
diff -u -b -r1.5 -r1.6
--- build-aux/config.guess 17 Oct 2011 00:06:51 -0000 1.5
+++ build-aux/config.guess 6 Jul 2012 23:19:44 -0000 1.6
@@ -2,9 +2,9 @@
# Attempt to guess a canonical system name.
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
-# 2011 Free Software Foundation, Inc.
+# 2011, 2012 Free Software Foundation, Inc.
-timestamp='2011-10-01'
+timestamp='2012-06-17'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
@@ -17,9 +17,7 @@
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -57,8 +55,8 @@
Originally written by Per Bothner.
Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free
-Software Foundation, Inc.
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
+Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -145,7 +143,7 @@
case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
*:NetBSD:*:*)
# NetBSD (nbsd) targets should (where applicable) match one or
- # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+ # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
# *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
# switched to ELF, *-*-netbsd* would select the old
# object file format. This provides both forward
@@ -202,6 +200,10 @@
# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
echo "${machine}-${os}${release}"
exit ;;
+ *:Bitrig:*:*)
+ UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
+ echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE}
+ exit ;;
*:OpenBSD:*:*)
UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
@@ -806,6 +808,9 @@
*:MINGW*:*)
echo ${UNAME_MACHINE}-pc-mingw32
exit ;;
+ i*:MSYS*:*)
+ echo ${UNAME_MACHINE}-pc-msys
+ exit ;;
i*:windows32*:*)
# uname -m includes "-pc" on this system.
echo ${UNAME_MACHINE}-mingw32
@@ -860,6 +865,13 @@
i*86:Minix:*:*)
echo ${UNAME_MACHINE}-pc-minix
exit ;;
+ aarch64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ aarch64_be:Linux:*:*)
+ UNAME_MACHINE=aarch64_be
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
alpha:Linux:*:*)
case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
EV5) UNAME_MACHINE=alphaev5 ;;
@@ -894,16 +906,16 @@
echo ${UNAME_MACHINE}-unknown-linux-gnu
exit ;;
cris:Linux:*:*)
- echo cris-axis-linux-gnu
+ echo ${UNAME_MACHINE}-axis-linux-gnu
exit ;;
crisv32:Linux:*:*)
- echo crisv32-axis-linux-gnu
+ echo ${UNAME_MACHINE}-axis-linux-gnu
exit ;;
frv:Linux:*:*)
- echo frv-unknown-linux-gnu
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
exit ;;
hexagon:Linux:*:*)
- echo hexagon-unknown-linux-gnu
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
exit ;;
i*86:Linux:*:*)
LIBC=gnu
@@ -945,7 +957,7 @@
test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
;;
or32:Linux:*:*)
- echo or32-unknown-linux-gnu
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
exit ;;
padre:Linux:*:*)
echo sparc-unknown-linux-gnu
@@ -986,7 +998,7 @@
echo ${UNAME_MACHINE}-dec-linux-gnu
exit ;;
x86_64:Linux:*:*)
- echo x86_64-unknown-linux-gnu
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
exit ;;
xtensa*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-gnu
@@ -1248,7 +1260,7 @@
NEO-?:NONSTOP_KERNEL:*:*)
echo neo-tandem-nsk${UNAME_RELEASE}
exit ;;
- NSE-?:NONSTOP_KERNEL:*:*)
+ NSE-*:NONSTOP_KERNEL:*:*)
echo nse-tandem-nsk${UNAME_RELEASE}
exit ;;
NSR-?:NONSTOP_KERNEL:*:*)
@@ -1317,6 +1329,9 @@
i*86:AROS:*:*)
echo ${UNAME_MACHINE}-pc-aros
exit ;;
+ x86_64:VMkernel:*:*)
+ echo ${UNAME_MACHINE}-unknown-esx
+ exit ;;
esac
#echo '(No uname command or uname output not recognized.)' 1>&2
Index: build-aux/config.sub
===================================================================
RCS file: /sources/texinfo/texinfo/build-aux/config.sub,v
retrieving revision 1.4
retrieving revision 1.5
diff -u -b -r1.4 -r1.5
--- build-aux/config.sub 17 Oct 2011 00:06:51 -0000 1.4
+++ build-aux/config.sub 6 Jul 2012 23:19:44 -0000 1.5
@@ -2,9 +2,9 @@
# Configuration validation subroutine script.
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
-# 2011 Free Software Foundation, Inc.
+# 2011, 2012 Free Software Foundation, Inc.
-timestamp='2011-10-08'
+timestamp='2012-06-17'
# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
@@ -21,9 +21,7 @@
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -76,8 +74,8 @@
GNU config.sub ($timestamp)
Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free
-Software Foundation, Inc.
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
+Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -132,6 +130,10 @@
os=-$maybe_os
basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
;;
+ android-linux)
+ os=-linux-android
+ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
+ ;;
*)
basic_machine=`echo $1 | sed 's/-[^-]*$//'`
if [ $basic_machine != $1 ]
@@ -223,6 +225,12 @@
-isc*)
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
+ -lynx*178)
+ os=-lynxos178
+ ;;
+ -lynx*5)
+ os=-lynxos5
+ ;;
-lynx*)
os=-lynxos
;;
@@ -247,6 +255,7 @@
# Some are omitted here because they have special meanings below.
1750a | 580 \
| a29k \
+ | aarch64 | aarch64_be \
| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] |
alpha64pca5[67] \
| am33_2.0 \
@@ -295,7 +304,7 @@
| pdp10 | pdp11 | pj | pjl \
| powerpc | powerpc64 | powerpc64le | powerpcle \
| pyramid \
- | rx \
+ | rl78 | rx \
| score \
| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb |
shbe | shle | sh[1234]le | sh3ele \
| sh64 | sh64le \
@@ -319,8 +328,7 @@
c6x)
basic_machine=tic6x-unknown
;;
- m6811 | m68hc11 | m6812 | m68hc12 | picochip)
- # Motorola 68HC11/12.
+ m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip)
basic_machine=$basic_machine-unknown
os=-none
;;
@@ -333,7 +341,10 @@
strongarm | thumb | xscale)
basic_machine=arm-unknown
;;
-
+ xgate)
+ basic_machine=$basic_machine-unknown
+ os=-none
+ ;;
xscaleeb)
basic_machine=armeb-unknown
;;
@@ -356,6 +367,7 @@
# Recognize the basic CPU types with company name.
580-* \
| a29k-* \
+ | aarch64-* | aarch64_be-* \
| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
@@ -407,7 +419,7 @@
| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
| pyramid-* \
- | romp-* | rs6000-* | rx-* \
+ | rl78-* | romp-* | rs6000-* | rx-* \
| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-*
| sheb-* | shbe-* \
| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* |
sparclet-* \
@@ -719,7 +731,6 @@
i370-ibm* | ibm*)
basic_machine=i370-ibm
;;
-# I'm not sure what "Sysv32" means. Should this be sysv3.2?
i*86v32)
basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
os=-sysv32
@@ -816,6 +827,10 @@
ms1-*)
basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
;;
+ msys)
+ basic_machine=i386-pc
+ os=-msys
+ ;;
mvs)
basic_machine=i370-ibm
os=-mvs
@@ -1337,13 +1352,13 @@
| -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
| -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
| -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
- | -openbsd* | -solidbsd* \
+ | -bitrig* | -openbsd* | -solidbsd* \
| -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
| -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
| -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
| -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
| -chorusos* | -chorusrdb* | -cegcc* \
- | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+ | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems*
\
| -mingw32* | -linux-gnu* | -linux-android* \
| -linux-newlib* | -linux-uclibc* \
| -uxpv* | -beos* | -mpeix* | -udk* \
@@ -1528,6 +1543,9 @@
c4x-* | tic4x-*)
os=-coff
;;
+ hexagon-*)
+ os=-elf
+ ;;
tic54x-*)
os=-coff
;;
@@ -1555,9 +1573,6 @@
;;
m68000-sun)
os=-sunos3
- # This also exists in the configure program, but was not the
- # default.
- # os=-sunos4
;;
m68*-cisco)
os=-aout
Index: build-aux/depcomp
===================================================================
RCS file: /sources/texinfo/texinfo/build-aux/depcomp,v
retrieving revision 1.4
retrieving revision 1.5
diff -u -b -r1.4 -r1.5
--- build-aux/depcomp 17 Oct 2011 00:06:51 -0000 1.4
+++ build-aux/depcomp 6 Jul 2012 23:19:44 -0000 1.5
@@ -1,10 +1,9 @@
#! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
-scriptversion=2011-04-16.09; # UTC
+scriptversion=2012-03-27.16; # UTC
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010,
-# 2011 Free Software Foundation, Inc.
+# Copyright (C) 1999-2012 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -28,7 +27,7 @@
case $1 in
'')
- echo "$0: No command. Try \`$0 --help' for more information." 1>&2
+ echo "$0: No command. Try '$0 --help' for more information." 1>&2
exit 1;
;;
-h | --h*)
@@ -40,11 +39,11 @@
Environment variables:
depmode Dependency tracking mode.
- source Source file read by `PROGRAMS ARGS'.
- object Object file output by `PROGRAMS ARGS'.
+ source Source file read by 'PROGRAMS ARGS'.
+ object Object file output by 'PROGRAMS ARGS'.
DEPDIR directory where to store dependencies.
depfile Dependency file to output.
- tmpdepfile Temporary file to use when outputing dependencies.
+ tmpdepfile Temporary file to use when outputting dependencies.
libtool Whether libtool is used (yes/no).
Report bugs to <address@hidden>.
@@ -57,6 +56,12 @@
;;
esac
+# A tabulation character.
+tab=' '
+# A newline character.
+nl='
+'
+
if test -z "$depmode" || test -z "$source" || test -z "$object"; then
echo "depcomp: Variables source, object and depmode must be set" 1>&2
exit 1
@@ -102,6 +107,12 @@
depmode=msvc7
fi
+if test "$depmode" = xlc; then
+ # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency informations.
+ gccflag=-qmakedep=gcc,-MF
+ depmode=gcc
+fi
+
case "$depmode" in
gcc3)
## gcc 3 implements dependency tracking that does exactly what
@@ -156,15 +167,14 @@
## The second -e expression handles DOS-style file names with drive letters.
sed -e 's/^[^:]*: / /' \
-e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the `deleted header file' problem.
+## This next piece of magic avoids the "deleted header file" problem.
## The problem is that when a header file which appears in a .P file
## is deleted, the dependency causes make to die (because there is
## typically no way to rebuild the header). We avoid this by adding
## dummy dependencies for each header file. Too bad gcc doesn't do
## this for us directly.
- tr ' ' '
-' < "$tmpdepfile" |
-## Some versions of gcc put a space before the `:'. On the theory
+ tr ' ' "$nl" < "$tmpdepfile" |
+## Some versions of gcc put a space before the ':'. On the theory
## that the space means something, we add a space to the output as
## well. hp depmode also adds that space, but also prefixes the VPATH
## to the object. Take care to not repeat it in the output.
@@ -203,18 +213,15 @@
# clever and replace this with sed code, as IRIX sed won't handle
# lines with more than a fixed number of characters (4096 in
# IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
- # the IRIX cc adds comments like `#:fec' to the end of the
+ # the IRIX cc adds comments like '#:fec' to the end of the
# dependency line.
- tr ' ' '
-' < "$tmpdepfile" \
+ tr ' ' "$nl" < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
- tr '
-' ' ' >> "$depfile"
+ tr "$nl" ' ' >> "$depfile"
echo >> "$depfile"
# The second pass generates a dummy entry for each header file.
- tr ' ' '
-' < "$tmpdepfile" \
+ tr ' ' "$nl" < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
>> "$depfile"
else
@@ -226,10 +233,17 @@
rm -f "$tmpdepfile"
;;
+xlc)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
aix)
# The C for AIX Compiler uses -M and outputs the dependencies
# in a .u file. In older versions, this file always lives in the
- # current directory. Also, the AIX compiler puts `$object:' at the
+ # current directory. Also, the AIX compiler puts '$object:' at the
# start of each line; $object doesn't have directory information.
# Version 6 uses the directory in both cases.
dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
@@ -259,12 +273,11 @@
test -f "$tmpdepfile" && break
done
if test -f "$tmpdepfile"; then
- # Each line is of the form `foo.o: dependent.h'.
+ # Each line is of the form 'foo.o: dependent.h'.
# Do two passes, one to just change these to
- # `$object: dependent.h' and one to simply `dependent.h:'.
+ # '$object: dependent.h' and one to simply 'dependent.h:'.
sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- # That's a tab and a space in the [].
- sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >>
"$depfile"
else
# The sourcefile does not contain any dependencies, so just
# store a dummy comment line, to avoid errors with the Makefile
@@ -275,23 +288,26 @@
;;
icc)
- # Intel's C compiler understands `-MD -MF file'. However on
- # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+ # Intel's C compiler anf tcc (Tiny C Compiler) understand '-MD -MF file'.
+ # However on
+ # $CC -MD -MF foo.d -c -o sub/foo.o sub/foo.c
# ICC 7.0 will fill foo.d with something like
# foo.o: sub/foo.c
# foo.o: sub/foo.h
- # which is wrong. We want:
+ # which is wrong. We want
# sub/foo.o: sub/foo.c
# sub/foo.o: sub/foo.h
# sub/foo.c:
# sub/foo.h:
# ICC 7.1 will output
# foo.o: sub/foo.c sub/foo.h
- # and will wrap long lines using \ :
+ # and will wrap long lines using '\':
# foo.o: sub/foo.c ... \
# sub/foo.h ... \
# ...
-
+ # tcc 0.9.26 (FIXME still under development at the moment of writing)
+ # will emit a similar output, but also prepend the continuation lines
+ # with horizontal tabulation characters.
"$@" -MD -MF "$tmpdepfile"
stat=$?
if test $stat -eq 0; then :
@@ -300,15 +316,21 @@
exit $stat
fi
rm -f "$depfile"
- # Each line is of the form `foo.o: dependent.h',
- # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+ # Each line is of the form 'foo.o: dependent.h',
+ # or 'foo.o: dep1.h dep2.h \', or ' dep3.h dep4.h \'.
# Do two passes, one to just change these to
- # `$object: dependent.h' and one to simply `dependent.h:'.
- sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
- # Some versions of the HPUX 10.20 sed can't process this invocation
- # correctly. Breaking it into two sed invocations is a workaround.
- sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
- sed -e 's/$/ :/' >> "$depfile"
+ # '$object: dependent.h' and one to simply 'dependent.h:'.
+ sed -e "s/^[ $tab][ $tab]*/ /" -e "s,^[^:]*:,$object :," \
+ < "$tmpdepfile" > "$depfile"
+ sed '
+ s/[ '"$tab"'][ '"$tab"']*/ /g
+ s/^ *//
+ s/ *\\*$//
+ s/^[^:]*: *//
+ /^$/d
+ /:$/d
+ s/$/ :/
+ ' < "$tmpdepfile" >> "$depfile"
rm -f "$tmpdepfile"
;;
@@ -344,7 +366,7 @@
done
if test -f "$tmpdepfile"; then
sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
- # Add `dependent.h:' lines.
+ # Add 'dependent.h:' lines.
sed -ne '2,${
s/^ *//
s/ \\*$//
@@ -359,9 +381,9 @@
tru64)
# The Tru64 compiler uses -MD to generate dependencies as a side
- # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+ # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
# At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
- # dependencies in `foo.d' instead, so we check for that too.
+ # dependencies in 'foo.d' instead, so we check for that too.
# Subdirectories are respected.
dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
test "x$dir" = "x$object" && dir=
@@ -407,8 +429,7 @@
done
if test -f "$tmpdepfile"; then
sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- # That's a tab and a space in the [].
- sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >>
"$depfile"
else
echo "#dummy" > "$depfile"
fi
@@ -443,11 +464,11 @@
p
}' | $cygpath_u | sort -u | sed -n '
s/ /\\ /g
-s/\(.*\)/ \1 \\/p
+s/\(.*\)/'"$tab"'\1 \\/p
s/.\(.*\) \\/\1:/
H
$ {
- s/.*/ /
+ s/.*/'"$tab"'/
G
p
}' >> "$depfile"
@@ -478,7 +499,7 @@
shift
fi
- # Remove `-o $object'.
+ # Remove '-o $object'.
IFS=" "
for arg
do
@@ -498,15 +519,14 @@
done
test -z "$dashmflag" && dashmflag=-M
- # Require at least two characters before searching for `:'
+ # Require at least two characters before searching for ':'
# in the target name. This is to cope with DOS-style filenames:
- # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+ # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
"$@" $dashmflag |
- sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
+ sed 's:^['"$tab"' ]*[^:'"$tab"' ][^:][^:]*\:['"$tab"' ]*:'"$object"'\: :'
> "$tmpdepfile"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
- tr ' ' '
-' < "$tmpdepfile" | \
+ tr ' ' "$nl" < "$tmpdepfile" | \
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
@@ -562,8 +582,7 @@
# makedepend may prepend the VPATH from the source file name to the object.
# No need to regex-escape $object, excess matching of '.' is harmless.
sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
- sed '1,2d' "$tmpdepfile" | tr ' ' '
-' | \
+ sed '1,2d' "$tmpdepfile" | tr ' ' "$nl" | \
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
@@ -583,7 +602,7 @@
shift
fi
- # Remove `-o $object'.
+ # Remove '-o $object'.
IFS=" "
for arg
do
@@ -652,8 +671,8 @@
sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u >
"$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
- sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >>
"$depfile"
- echo " " >> "$depfile"
+ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >>
"$depfile"
+ echo "$tab" >> "$depfile"
sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
rm -f "$tmpdepfile"
;;
Index: build-aux/install-sh
===================================================================
RCS file: /sources/texinfo/texinfo/build-aux/install-sh,v
retrieving revision 1.4
retrieving revision 1.5
diff -u -b -r1.4 -r1.5
--- build-aux/install-sh 17 Oct 2011 00:06:51 -0000 1.4
+++ build-aux/install-sh 6 Jul 2012 23:19:44 -0000 1.5
@@ -1,7 +1,7 @@
#!/bin/sh
# install - install a program, script, or datafile
-scriptversion=2011-01-19.21; # UTC
+scriptversion=2011-11-20.07; # UTC
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
@@ -35,7 +35,7 @@
# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
+# 'make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
@@ -156,7 +156,7 @@
-s) stripcmd=$stripprog;;
-t) dst_arg=$2
- # Protect names problematic for `test' and other utilities.
+ # Protect names problematic for 'test' and other utilities.
case $dst_arg in
-* | [=\(\)!]) dst_arg=./$dst_arg;;
esac
@@ -190,7 +190,7 @@
fi
shift # arg
dst_arg=$arg
- # Protect names problematic for `test' and other utilities.
+ # Protect names problematic for 'test' and other utilities.
case $dst_arg in
-* | [=\(\)!]) dst_arg=./$dst_arg;;
esac
@@ -202,7 +202,7 @@
echo "$0: no input file specified." >&2
exit 1
fi
- # It's OK to call `install-sh -d' without argument.
+ # It's OK to call 'install-sh -d' without argument.
# This can happen when creating conditional directories.
exit 0
fi
@@ -240,7 +240,7 @@
for src
do
- # Protect names problematic for `test' and other utilities.
+ # Protect names problematic for 'test' and other utilities.
case $src in
-* | [=\(\)!]) src=./$src;;
esac
@@ -354,7 +354,7 @@
if test -z "$dir_arg" || {
# Check for POSIX incompatibilities with -m.
# HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
- # other-writeable bit of parent directory when it shouldn't.
+ # other-writable bit of parent directory when it shouldn't.
# FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
ls_ld_tmpdir=`ls -ld "$tmpdir"`
case $ls_ld_tmpdir in
Index: build-aux/mdate-sh
===================================================================
RCS file: /sources/texinfo/texinfo/build-aux/mdate-sh,v
retrieving revision 1.4
retrieving revision 1.5
diff -u -b -r1.4 -r1.5
--- build-aux/mdate-sh 17 Oct 2011 00:06:51 -0000 1.4
+++ build-aux/mdate-sh 6 Jul 2012 23:19:44 -0000 1.5
@@ -3,8 +3,7 @@
scriptversion=2010-08-21.06; # UTC
-# Copyright (C) 1995, 1996, 1997, 2003, 2004, 2005, 2007, 2009, 2010
-# Free Software Foundation, Inc.
+# Copyright (C) 1995-2012 Free Software Foundation, Inc.
# written by Ulrich Drepper <address@hidden>, June 1995
#
# This program is free software; you can redistribute it and/or modify
@@ -40,7 +39,7 @@
case $1 in
'')
- echo "$0: No file. Try \`$0 --help' for more information." 1>&2
+ echo "$0: No file. Try '$0 --help' for more information." 1>&2
exit 1;
;;
-h | --h*)
@@ -76,7 +75,7 @@
export LC_TIME
# GNU ls changes its time format in response to the TIME_STYLE
-# variable. Since we cannot assume `unset' works, revert this
+# variable. Since we cannot assume 'unset' works, revert this
# variable to its documented default.
if test "${TIME_STYLE+set}" = set; then
TIME_STYLE=posix-long-iso
@@ -96,14 +95,14 @@
ls_command="$ls_command -n"
fi
-# A `ls -l' line looks as follows on OS/2.
+# A 'ls -l' line looks as follows on OS/2.
# drwxrwx--- 0 Aug 11 2001 foo
# This differs from Unix, which adds ownership information.
# drwxrwx--- 2 root root 4096 Aug 11 2001 foo
#
# To find the date, we split the line on spaces and iterate on words
# until we find a month. This cannot work with files whose owner is a
-# user named `Jan', or `Feb', etc. However, it's unlikely that `/'
+# user named "Jan", or "Feb", etc. However, it's unlikely that '/'
# will be owned by a user whose name is a month. So we first look at
# the extended ls output of the root directory to decide how many
# words should be skipped to get the date.
@@ -116,7 +115,7 @@
command=
until test $month
do
- test $# -gt 0 || error "failed parsing \`$ls_command /' output"
+ test $# -gt 0 || error "failed parsing '$ls_command /' output"
shift
# Add another shift to the command.
command="$command shift;"
@@ -136,7 +135,7 @@
esac
done
-test -n "$month" || error "failed parsing \`$ls_command /' output"
+test -n "$month" || error "failed parsing '$ls_command /' output"
# Get the extended ls output of the file or directory.
set dummy x`eval "$ls_command \"\\\$save_arg1\""`
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- texinfo COPYING INSTALL.generic doc/fdl.texi bu...,
Karl Berry <=