Re: [avr-gcc-list] avrdude: Cannot program ATmega8 using JTAG ICE mkII

[Shaun Jackman]

On 1/12/07, Shaun Jackman <address@hidden> wrote:
> I used avrdude -vvvv to capture the offending packet. I'll be happy to
> provide any other information that's needed to help troubleshoot this.
...
> avrdude: jtagmkII_recv():
...
> avrdude: Recv: . [88] . [13] . [80]
...
> avrdude: jtagmkII_recv(): CRC OK
> avrdude: jtagmkII_recv(): Got message seqno 16 (command_sequence == 16)
> avrdude: stk500v2_command(): unknown status 0x80
> avrdude: stk500v2_paged_write: write command failed

I read the protocol documentation that Atmel provides and found that
the status code of 0x80 is the warning STATUS_CMD_TOUT `Command timed
out'. avrdude doesn't currently handle this status code and exits.
What should it do? This warning was in response to a
CMD_PROGRAM_FLASH_ISP (0x13) command.

Cheers,
Shaun