[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] Try to improve E100's performance at high sample

From: Philip Balister
Subject: Re: [Discuss-gnuradio] Try to improve E100's performance at high sample rate
Date: Mon, 16 Jan 2012 11:51:25 -0500
User-agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv: Gecko/20111108 Fedora/3.1.16-1.fc14 Thunderbird/3.1.16

On 01/13/2012 12:19 PM, ziyang wrote:
> BTW, it took almost twice the amount of time to build both uhd and GNU
> radio after burning the latest console file system, and the
> initialization process of uhd (when device information is printed out)
> took a lot longer time than before as well. But what I concerned more is
> that much fewer packets could be received, compared with another e100
> which has the same flow graph setup but installed previous versions of
> tools: file system, UHD_003.004.000-1a25e48, GNU radio 3.5.0. Could it
> be caused by some hardware problems? I will greatly appreciate it if
> someone could give me a hint on this.

Assuming you downloaded u-boot from dropbox, we just found a regression
that slipped into u-boot on Dec 6. I have updated the version in the
dropbox to:


All you need to do is copy u-boot onto the FAT partition and things
should speed up quite a bit.

This makes sure L2 cache is on before Linux boots. There is some
discussion of how to properly turn it on at boot in Linux at the moment.

This does not effect the factory file system.

Thanks for reporting this!


reply via email to

[Prev in Thread] Current Thread [Next in Thread]