Re: FC4 + CA-42 + Nokia 2112 -- Need help with initialization parameters.

[Harsha Ramesh]

Hi Guys,

Any updates on this would be great. If you need more information, please let me know. Secondly, is the Nokia 2112 model supported by gnokii 0.6.9

thanks,
Harsha

On 11/3/05, Harsha Ramesh <address@hidden> wrote:

Hi Ppl,

Details:
Fedora Core 4 - Kernel 2.6.14
Nokia 2112
CA-42 cable
gnokii 0.6.9

Issue:

When i run gnokiid, i get the following output:

LOG: debug mask is 0x1
Initialising GSM
phone instance config:
model: AT
port_device: /dev/ttyACM0
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
sm_retry: off
Initializing AT capable mobile phone ...
Serial device: opening device /dev/ttyACM0
Serial device: setting RTS to high and DTR to high
Message sent: 0x00 / 0x0004
41 54 5a 0d                                     | ATZ            
write: [ATZ<cr>]
read : [ATZ<cr><cr><lf>OK<cr><lf>]
Message received: 0x00 / 0x000a
02 41 54 5a 0d 0d 0a 4f 4b 0d                   |  ATZ   OK      
Received message type 00
Message sent: 0x00 / 0x0005
41 54 45 31 0d                                  | ATE1           
write: [ATE1<cr>]
read : [ATE1<cr><cr><lf>OK<cr><lf>]
Message received: 0x00 / 0x000b
02 41 54 45 31 0d 0d 0a 4f 4b 0d                |  ATE1   OK     
Received message type 00
Message sent: 0x00 / 0x000a
41 54 2b 43 4d 45 45 3d 31 0d                   | AT+CMEE=1      
write: [AT+CMEE=1<cr>]
read : [AT+CMEE=1<cr><cr><lf>ERROR<cr><lf>]
Message received: 0x00 / 0x0013
03 41 54 2b 43 4d 45 45 3d 31 0d 0d 0a 45 52 52 |  AT+CMEE=1   ERR
4f 52 0d                                        | OR             
Received message type 00
Message sent: 0x06 / 0x0008
41 54 2b 43 47 4d 4d 0d                         | AT+CGMM        
write: [AT+CGMM<cr>]
read : [AT+CGMM<cr><cr><lf>ERROR<cr><lf>]
Message received: 0x06 / 0x0011
03 41 54 2b 43 47 4d 4d 0d 0d 0a 45 52 52 4f 52 |  AT+CGMM   ERROR
0d                                              |                
Received message type 06
Initialization failed (8)
GSM/FBUS init failed!
gn_vm_initialise - VM_GSMInitialise failed

Now, on my windows box i supply additional initialization parameters - AT+CRM=1; +CSO=33

My guess is that my phone did not initialize because these parameters didnt get through. If that is the case, then where do i add these additional parameters? If these parameters need to be added to the source, then could you please tell me the steps for it? I am a rather proficient Java developer, but unfortunately i dont understand the C code that easily now. Please bear with my ignorance.

My gnokiirc file looks as follows:
[global]
port = /dev/ttyACM0
model = AT
initlength = default
connection = serial
use_locking = no
handshake = software
smsc_timeout = 10
[gnokiid]
bindir = /usr/local/sbin
[logging]
debug = on
rlpdebug = off
xdebug = off


thanks,
Harsha