Re: [gpsd-users] Garmin Oregon 400 in spanner mode with gpsd 3.5-1

[Miroslav Pragl]

And here's log from current version of gpsd.PLEASE NOTE THAT THE RUN 
CONDITION IS NIT THE SAME - I have to kill "old" gpsd first.

# ./gpsd -nND 6 /dev/ttyUSB1
gpsd:INFO: launching (Version 3.7)
gpsd:IO: opening IPv4 socket
gpsd:SPIN: passivesock_af() -> 3
gpsd:IO: opening IPv6 socket
gpsd:SPIN: passivesock_af() -> 4
gpsd:INFO: listening on port gpsd
gpsd:PROG: NTPD shmat(0,0,0) succeeded, segment 0
gpsd:PROG: NTPD shmat(32769,0,0) succeeded, segment 1
gpsd:PROG: NTPD shmat(65538,0,0) succeeded, segment 2
gpsd:PROG: NTPD shmat(98307,0,0) succeeded, segment 3
gpsd:ERROR: shmget(1196446532, 8240, 0666) failed: Invalid argument
gpsd:ERROR: shared-segment creation failed,
gpsd:INFO: NTPD ntpd_link_activate: 1
gpsd:INFO: stashing device /dev/ttyUSB1 at slot 0
gpsd:PROG: no etc/gpsd/device-hook present, skipped running ACTIVATE hook
gpsd:INFO: opening GPS data source type 3 at '/dev/ttyUSB1'
gpsd:INFO: speed 9600, 8N1
gpsd:SPIN: open(/dev/ttyUSB1) -> 5 in gpsd_serial_open()
gpsd:PROG: Probing "Garmin USB binary" driver...
gpsd:INFO: attempting USB device enumeration.
gpsd:INFO: 8087:0024 (bus 1, device 2)
gpsd:INFO: 8087:0024 (bus 2, device 2)
gpsd:INFO: 1d6b:0002 (bus 1, device 1)
gpsd:INFO: 1d6b:0002 (bus 2, device 1)
gpsd:INFO: 138a:003c (bus 1, device 3)
gpsd:INFO: 091e:0003 (bus 1, device 33)
gpsd:SHOUT: vendor/product match with 091e:0003 found
gpsd:PROG: Garmin: Set garmin_gps driver mode = 0
gpsd:PROG: Garmin: PrintUSBPacket()
gpsd:PROG: Garmin: Private, Set Mode: 1
gpsd:IO: => GPS: 4b6e1001020000000400000001000000
gpsd:IO: Garmin: SendPacket(), wrote 16 bytes
gpsd:PROG: Probe found "Garmin USB binary" driver...
gpsd:INFO: gpsd_activate(): activated GPS (fd 5)
gpsd:PROG: Garmin: Get Product Data
gpsd:IO: Garmin: PrintSERPacket(, 0xfe, 00, )
gpsd:PROG: Garmin: Appl, Product Data req
gpsd:IO: Garmin: PrintSERPacket(, 0xfe, 00, )
gpsd:IO: => GPS: 10fe00021003
gpsd:IO: Garmin: SendPacket(), wrote 6 bytes
gpsd:PROG: Garmin: Set to send reports every 1 second
gpsd:IO: Garmin: PrintSERPacket(, 0xa, 0x2, )
gpsd:PROG: Garmin: Appl, Command Data: Start Xmit PVT data
gpsd:IO: Garmin: PrintSERPacket(, 0xa, 0x2, )
gpsd:IO: => GPS: 100a023100c31003
gpsd:IO: Garmin: SendPacket(), wrote 8 bytes
gpsd:INFO: device /dev/ttyUSB1 activated
gpsd:INFO: running with effective group ID 18
gpsd:INFO: running with effective user ID 99
gpsd:INFO: startup at 2012-07-11T20:06:07.000Z (1342037167)
gpsd:SPIN: select() {3 4 5} -> { 5 } at 1342037167.862403 (errno 0)
gpsd:SPIN: packet_get() fd 5 -> 16 (0)

(and no data coming)

It looks to me that although gpsd asks GPS to keep sending data, the GPS 
doesn't give a address@hidden

MP