Re: [Ltib] spec file pulling from CVS

[Andrea Galbusera]

Stuart,
sorry for bothering you again on this... My last test was to go for a straight 
build of the package by issuing 
a ./ltib -p tpt2000-cvs.spec (no previous run with -m prep). Below is the 
output I get. To me it looks like 
ltib thinking that a source directory should be already available, instead of 
executing %prep and checking out things from CVS.
Do I miss something? Do I have to reset any "cached state" of previous run or 
something like that?

TIA
Andrea

> $ ./ltib -p tpt2000-cvs.spec
> 
> Processing platform: Tecnint MPC512x based boards
> ===================================================
> using config/platform/mpc5121tpt/.config
> 
> Processing: tpt2000-cvs
> =========================
> Build path taken because: directory build, no prebuilt rpm, 
> scbuild/scdeploy already unpacked package
> 
> Processing: tpt2000-cvs
> =========================
> Build path taken because: directory build, build key set, no prebuilt rpm, 
> 
> rpmbuild --dbpath /home/gizero/work/tpt/mpc5121/ltib-tpt/rootfs//var/lib/rpm 
> --target ppc --define '_unpackaged_files_terminate_build 0' --define 
> '_target_cpu ppc' 
> --define '__strip strip' --define '_topdir 
> /home/gizero/work/tpt/mpc5121/ltib-tpt/rpm' 
> --define '_prefix /usr' --define '_tmppath 
> /home/gizero/work/tpt/mpc5121/ltib-tpt/tmp' 
> --define '_rpmdir /home/gizero/work/tpt/mpc5121/ltib-tpt/rpm/RPMS'  
> --define '_mandir /usr/share/man' --define '_sysconfdir /etc' 
> --define '_localstatedir /var' -bc --short-circuit  
> /home/gizero/work/tpt/mpc5121/ltib-tpt/dist/lfs-5.1/tpt2000/tpt2000-cvs.spec
> Building target platforms: ppc
> Building for target ppc
> Executing(%build): /bin/sh -e 
> /home/gizero/work/tpt/mpc5121/ltib-tpt/tmp/rpm-tmp.41500
> + umask 022
> + cd /home/gizero/work/tpt/mpc5121/ltib-tpt/rpm/BUILD
> + cd /home/gizero/work/tpt/mpc5121/ltib-tpt/rpm/BUILD/tpt2000-local
> /home/gizero/work/tpt/mpc5121/ltib-tpt/tmp/rpm-tmp.41500: line 21: cd: 
> /home/gizero/work/tpt/mpc5121/ltib-tpt/rpm/BUILD/tpt2000-local: No such file 
> or directory
> error: Bad exit status from 
> /home/gizero/work/tpt/mpc5121/ltib-tpt/tmp/rpm-tmp.41500 (%build)
> 
> 
> RPM build errors:
>     Bad exit status from 
> /home/gizero/work/tpt/mpc5121/ltib-tpt/tmp/rpm-tmp.41500 (%build)
> Build time for tpt2000-cvs: 0 seconds
> 
> Failed building tpt2000-cvs
> 
> 
> f_buildrpms() returned an error, exiting
> traceback:
>  main:566
> 
> 
> Started: Tue Mar 16 10:40:33 2010
> Ended:   Tue Mar 16 10:40:33 2010
> Elapsed: 0 seconds
> 
> These packages failed to build:
> tpt2000-cvs 
> 
> Build Failed
> 
> Exiting on error or interrupt