[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [avr-gcc-list] programming the at90can128

From: Brian Dean
Subject: Re: [avr-gcc-list] programming the at90can128
Date: Tue, 16 Nov 2004 22:06:05 -0500
User-agent: Mutt/

On Tue, Nov 16, 2004 at 07:15:52AM -0800, Theodore A. Roth wrote:

> [I seem to recall Brian Dean saying that he was working with the
> can128.  Maybe he can lend a hand with the data we need to add
> support in avarice. Wink, wink. Nudge, nudge.]

I'll do what I can.  I do have a chip that David sent along for me to
play with, but I haven't yet mounted it on a board.  David has a pair
of them mounted on MAVRIC-II boards and I verified that I could enter
programming mode at least using AVRDUDE and set fuses and such using
his boards.  I'll see if I can mount my AT90CAN128 chip that David
sent and spend some more cycles on this.  I understand from David that
AVR Studio seems to support the new chip (I'd be surprised if it
didn't) so I think he at least has a method of programming the chip
until we can get our stuff working on the open source side.

I've been itching to play with CAN for a while, looks like now I have
a new toy :-) It's an added plus that the AT90CAN128 is pin compatible
with the ATmega128 so it will drop right onto my MAVRIC* boards with
no changes.

Brian Dean
BDMICRO - ATmega128 Based MAVRIC Controllers

reply via email to

[Prev in Thread] Current Thread [Next in Thread]