[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [avrdude-dev] Timing under Win2k / stk200

From: Alexander Peter
Subject: Re: [avrdude-dev] Timing under Win2k / stk200
Date: Thu, 17 Jul 2003 19:31:03 +0200

> IMHO the SPI timing is too fast to programm the ATmega32.
> Most likely your mega32 runs on the internal oscillator at 1MHz, while
> your AT90S8535 runs with an external oscillator at some higher
> frequency. The maximum speed of the programming interface is
> dependent on the target's clock speed.

I agree in this point, but this is not the problem: I've set the fuses to
work with an external 8 MHz Crystal befor programming the flash...

reply via email to

[Prev in Thread] Current Thread [Next in Thread]