[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: hangs with (hd0,2)/hurd/ext2fs.static

From: Patrick Strasser
Subject: Re: hangs with (hd0,2)/hurd/ext2fs.static
Date: Mon, 07 Feb 2005 15:58:46 +0100
User-agent: Debian Thunderbird 1.0 (X11/20050116)

Shakthi Kannan wrote:

Rebooted to grub.At grub prompt,

    ("find /boot/gnumach.gz" returns (hd0,2)

Once You've found gnumach.gz you've found your working partition.
You can set your default partition for the following commands with "root":

root (hd0,2)

For the "kernel" and "module" command leave out the "(hd0,2)"

Partition check (DOS partitions):
    hd0: hd0: status timeout: status=0xff { Busy }
hd1: disabled DMA
hd0: drive not ready for command

Tell us more about your IDE configuration:
Do you have some other drive on ide channel 1 (some /dev/hda in Linux)?

Once more: Better use the GRUB Image from
Write it on a floppy and edit the menu.lst to match your setup.


reply via email to

[Prev in Thread] Current Thread [Next in Thread]